56
Models MT5600ZDX & ZDXV
S25 seconds 0255 5 Sets the length of time, in sec-
onds, that the modem ignores
DTR for taking the action speci-
fied by &Dn. Its units are one
hundredths of a second.
Register Unit Range Default Description
28 Bit-Mapped Options Status Default: 0
Bit 0-1 Reserved
Bit 2 Reserved (always 0)
Bit 3-4 Pulse Dialing (&Pn)
0 = 39%-61% make/break ratio at 10 pulses per second (&P0)--
Default.
0 = 33%-67% make/break ratio at 10 pulses per second (&P1).
0 = 39%-61% make/break ratio at 20 pulses per second (&P2).
0 = 33%-67% make/break ratio at 20 pulses per second (&P3).
S29 1 minute 0255 70ms Sets the length of time, in
units of 10 ms, that the
modem will go on-hook when
it encounters a flash (!) dial
modifier in the dial string. The
time can be limited as it is a
country dependent parameter.
S30 1 minute 0255 0 S30 specifies the length of
time (in tens of seconds) that
the modem waits before
disconnecting when no data is
sent or received. This function
is only applicable to buffer-
mode.
S32 decimal 0255 17 Sets the value of the XON character.
S33 decimal 0255 19 Sets the value of the XOFF charac-
ter.