6-12 USING F-CODE FEATURES

Polling a document using a subaddress and password
1 Switch to the Fax mode by pressing [COPY
FAX
SCAN].
2 Press [Advanced Functions] until “F-Code Polling” appears on the LCD then press
[Enter].
F-Code Polling
/
/Enter
– or –
Press the “F-Code Polling”.soft key
Enter Sub-Address
_
3 Use the numeric keys to enter the appropriate ITU-T subaddress.
Then press [Enter].
Enter Password
_
The password setting is optional, but required if the other party has set a password on
their F-code box.
4 Use the numeric keys to enter the ITU-T password.
Then press [Enter].
If you do not need to enter the ITU-T password, press [Enter] without entering any
number.
Enter Fax Number
_
5 Enter the fax number.
You may use a one-touch key, speed-dial number or the numeric keys to enter the fax
number.
6 Press [Start].
== Command:01 ==
Your machine dials the number and polling the document from the remote F-code
compatible machine.
To cancel the polling in progress, press [Job Confirm./Fax Cancel] and [Cancel], [Cancel].
To cancel the delayed polling, press [Job Confirm./Fax Cancel], search the command
number you want to cancel using the cursor key, then press [Cancel], [Cancel]. (See
also “Reviewing or canceling command,” on page 4-8.)