10-5USER SETTINGS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
USER SETTINGS
Fax settings
The fax settings allows you to customize various fax settings to match your needs.
Accessing the fax settings
1 Press [Menu], [2], [2].
[Program] No.22_
2 Fax Settings
2 Press [Enter].
[Program] No.2201
01 Scan Parameters
3 Use [ ] or [ ] to search the item you want to set or change and press [Enter].
4 Change settings and press [Enter]. For details of each setting, refer to the following
table:
5 When you have finished, press [Reset] to return to the standby mode.
The underlined settings are factory defaults.
01 Scan Parameters Resolution You can choose one of the following.
Normal Scan at 8 dots/mm × 3.85 lines/mm.
Fine Scan at 8 dots/mm × 7.7 lines/mm.
S-Fine Scan at 8 dots/mm × 15.4 lines/mm.
Gray Scan at 8 dots/mm × 7.7 lines/mm.
Contrast You can choose one of the following.
Normal, Dark, Darkest, Light or Lightest.
S-Fine Resol. You can choose one of the following.
400dpi, 600dpi
02 Print Parameters Rx Reduc. Rate (Refer to the page 5-6.)
Auto Automatically reduces printouts at vari-
able rates down to a minimum of 50%. Tries
to reduce printout to fit on one sheet of your
selected paper size. If it can’t, print the received
document at 100% size on two or more pages.
100% Does not reduce the received documents.
Margin Set the reduction margin for Auto reduction. (00 to 85 mm)
40 mm
Half Page Recpt.*
OFF Not combine the half-page receptions.
ON Combines two of half-page receptions onto a
single sheet.
* When the optional duplex unit is installed on the MFX-1330, the fol-
lowing menu will be displayed.
Paper Save
OFF Will not perform either half-page receptions or
duplex receptions.
H.Page Rx Combines two half-page receptions onto a single
sheet.
Duplex Rx Combines and prints the received two one-sided
pages onto both sides of a single sheet.