3-10 AUTODIALLER & DIALLING OPTIONS
Erasing a call group
1 Press [Menu], [1], [3], [2], then [Enter].
2 Press [ ] or [ ] to select the call group you want to erase.
You can also select the call group by directly entering the two-digit identifier code
(01-32).
3 Press [Enter] twice.
If you want to exit without erasing, press [Cancel].
4 To erase another call group, repeat the procedure from step 2.
Otherwise, press [Reset] to exit and return to the standby mode.
How to dial using a call group
Press this key twice.
Enter group number.Press Start.
MFX-1330 control panel
To perform call group fax dialing
1 Switch to the Fax mode by pressing [COPY
FAX
SCAN].
2 Place the document on the ADF or the document glass.
3 When you use the document glass, select the document size by pressing [Doc. Size].
4 Adjust the document resolution and contrast.
5 Press [Speed Dial /Group] twice.
Enter Group No.
G_
6 Use the numeric keys to enter the two-digit call group number.
7 Press [Start].
NOTE: The document glass is available only for the MFX-1330.