4-21SENDING FAXES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
SENDING FAXES
Using alternative telephone network service providers (Dial prefix)
When you make a call, you may want to use alternative telephone network service pro-
vider to take advantage of low rates. You can store the access codes in “Dial Prefix” key.
The following information describes how to program the access number.
1 Press [Menu], [2], [2], [1], [6], then [Enter].
Dial Prefix No
_
2 Enter the telephone network access number using the numeric keys.
Access numbers may contain up to 40 digits.
If you must wait for another dial tone at the dialing, enter a pause at the end of the
access number by pressing [Advanced Functions] repeatedly until “Pause /Dial Opt.”
appears and press [Enter] or press the “Pause /Dial Opt.” soft key.
(Refer to “Special
dialing characters,” page 3-3.)
3 Press [Enter] to save it.
4 Press [Reset] to exit and return to standby mode.
NOTE:
“Pause /Dial Opt.”
is a default soft key on the F-300
Sending faxes with the Dial prefix feature
To dial using the numeric keys
1 Place the document on the ADF or document glass.
2 Press [Advanced Functions] repeatedly until “Dial Prefix(/N)” appears then press
[Enter] to enter an “/N”.
– or –
If you assigned “Dial Prefix” to a soft key (page 8-2), simply press that key.
This symbol indicates access to the alternative telephone network.
Press Start
/N_
3 Enter the fax number using the numeric keys.
4 Press [Start].
NOTE: • You must enter the full National Code telephone number when dialing telephone
numbers via any network.
• You can assign the “Dial prefix” to a soft key (page 8-2) to enter an “/N”, but it can-
not be combined with any one-touch key or speed-dial number for dialing. In order
to send faxes using the one-touch key or speed-dial number, you must instruct
your machine to access the alternative telephone network when you store the fax
number into your autodialer.
To enter an access number into your autodialer:
Before entering a fax number, press [Advanced Functions] repeatedly until “Dial
Prefix(/N)” appears then press [Enter] to enter an “/N”. And then, enter the fax
number.
• The document glass is available only for the MFX-1330.