7-3COPYING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
COPYING
Making copies
Making copies using the ADF
1 Switch the machine to copy mode by pressing
[COPY
FAX
SCAN]
.
Copy Ready 01
Auto Ltr 100%
2 Place your document face up on the ADF and adjust the document guides to the docu-
ment size.
3 As needed, set the copy settings including the
document type and scanning contrast,
number of copies, zoom ratio and sort setting. See “Basic copy settings” on page 7-4.
To clear the settings, press [Reset].
4 Press [Start] to begin copying.
To stop copying, press [Stop].
Making copies using the document glass
The document glass is available only for the MFX-1330.
1 Switch the machine to copy mode by pressing
[COPY
FAX
SCAN]
.
Copy Ready 01
Auto Ltr 100%
2 Make sure that there is no document on the ADF. If a document is on the ADF, it
takes priority over the document on the document glass.
3 Place your document face down on the document glass and align it to the upper left
corner. Then close the platen cover.
4 Press [Doc. Size] to select the document size, Letter,
Half-letter
or Legal.
5 As needed, set the copy settings including the
document type and scanning contrast,
number of copies, zoom ratio and sort setting. See “Basic copy settings” on page 7-4.
To clear the settings, press [Reset].
6 Press [Start] to begin copying.
To stop copying, press [Stop].