2-16 GETTING STARTED

4 After loading paper into the bypass tray, you need to set the correct paper size by
pressing [Bypass].
(
For F-300, press [Advanced functions] repeatedly until “Bypass” is displayed on the
LCD and then press [Enter].
)
Bypass Tray :Ltr
/
/Enter
5 Press [ ] or [ ] to select the paper size you want to use.
Bypass Tray :Ltr
/
/Enter
6 Press [Enter].
NOTE: You can set the default paper size for the bypass tray. See step 6 of “Setting of the
paper size” below.

Setting of the paper size

Default setting: 1st cassette: Letter, 2nd cassette (option): Letter, Bypass Tray: Letter
After loading paper into the paper cassette, you need to set the correct paper size by
using the following procedure.
1 Press [Menu], [2], [1], [0], [1], [Enter].
1st Cassette :Ltr
/
/Enter
2 Press [ ] or [ ] to select the paper size you will use in the first cassette.
3 Press [Enter].
If you have the optional second cassette, proceed to step 4.
Otherwise, skip to step 6.
4 Press [ ] or [ ] to select the paper size you will use in the second cassette.
2nd Cassette :Ltr
/
/Enter
5 Press [Enter.]
6 Also, you can set the default paper size for the bypass tray. Press [ ] or [ ] to select
the paper size for the bypass tray. After, you load the paper into the bypass tray, you
need to set the correct paper size by pressing [Bypass].
Bypass Tray :Ltr
/
/Enter
7 Press [Enter].
8 Press [Reset] to exit and return to the standby mode.