|
|
|
| MAINTENANCE | |
CHANGE THE SPARK PLUG |
| B | A |
| |
Remove the Snow Hood |
|
| |||
|
|
| |||
1. | Remove the choke control knob (A, Figure 19). |
|
|
|
|
2. | Remove the safety key (B). |
| D |
|
|
3. | Remove the mounting screws (A, Figure 20). |
|
|
| |
4. | Slowly remove the snow hood (B) Make sure that the primer button | E |
|
| |
| hose (C) and the ignition wire (D) are not disconnected. |
|
|
|
|
5. | The spark plug (E) can now be accessed. |
|
|
|
|
6. | To install the snow hood, first make sure that the primer button hose |
|
|
| |
| and the ignition wire are connected. |
|
|
| C |
7. | Mount the snow hood to the engine and secure with the mounting |
|
| ||
| screws. |
|
|
|
|
8. | Connect the choke control knob (A, Figure 21) with the choke shaft |
|
|
| |
| on the carburetor (B). Make sure the choke control knob is properly |
|
|
| |
| installed. If the choke control knob is not installed correctly, the choke |
|
|
| |
| will not operate. |
|
|
|
|
9. | Install the safety key (C). |
| Removing the Snow Hood |
| Figure 20 |
|
|
|
| ||
| A |
|
|
|
|
|
|
| A | B | C |
|
|
|
|
| |
| B |
|
|
|
|
Snow Thrower Engine | Figure 19 | Connecting Choke Control Knob |
| Figure 21 | |
|
|
|
21