OPERATOR SAFETY

Moving Parts

DANGER

Keep hands, feet, and clothing away from rotating parts. Rotating parts can contact or entangle hands, feet, hair, clothing, or accessories.

Failure to observe these safety instructions will result in traumatic amputation or severe laceration.

Whenever cleaning, repairing, or inspecting the snow thrower, make sure the engine is OFF, spark plug wire is disconnected, and all moving parts have stopped.

Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

Never operate the snow thrower without proper guards, and other safety devices in place and working.

Never leave the snow thrower unattended while engine is running. Always disengage the auger and traction controls, stop engine, and remove keys.

Keep all loose clothing away from the front of the snow thrower and auger. Scarves, mittens, dangling drawstrings, loose clothes, and pants can quickly become caught in the rotating device and amputation will occur. Tie up

long hair and remove jewelry.

Run the machine a few minutes after discharging snow to prevent freeze-up of the collector/impeller.

Disengage power to the collector/impeller when snow thrower is transported or not in use.

Thrown Objects

Children

DANGER

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and the operating activity. Never assume that children will remain where you last saw them.

Keep children out of the area during operation. Children are often attracted to the equipment. Be mindful of all persons present.

Be alert and turn unit off if children enter the area.

Never allow children to operate the unit.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision. Children may be present.

Engine Safety

DANGER

Safe operation of the snow thrower requires the proper care and maintenance of the engine. Failure to observe the safety instructions in this manual will result in death or serious injury.

Disengage all clutches and shift into neutral before starting the engine.

Let the engine adjust to outdoor temperatures before starting to clear snow.

Use a grounded three-wire plug-in for all snow throwers equipped with electric drive motors or electric starting motors.

DANGER

Objects can be picked up by auger and thrown from chute. Never discharge snow toward bystanders or allow anyone in front of the snow thrower. Failure to observe these safety instructions will result in death or serious injury.

Always wear safety glasses or eye shields while during operation, and while performing an adjustment or repair.

Always be aware of the direction the snow is being thrown. Nearby pedestrians, pets, or property may be harmed by objects being thrown.

Be aware of your environment while operating the snow thrower. Running over items such as, gravel, doormats, newspapers, toys, and rocks hidden under snow, can all be thrown from the chute or jam in the auger.

Use extreme caution when operating on or crossing gravel drives, walks, or roads.

Adjust the collector housing height to clear gravel or crushed rock surface.

Never operate the snow thrower near glass enclosures, automobiles, window wells, drop-offs, and the like without proper adjustment of the discharge chute angle.

Familiarize yourself with the area in which you plan to operate the snow thrower. Mark off boundaries of walkways and driveways.

DANGER

Engines give off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide can cause nausea, fainting, or death.

Start and run engine outdoors.

Do not run the engine in an enclosed area, even if doors or windows are open.

7

Page 7
Image 7
Murray 1737920, 1695722 manual Moving Parts

1737920, 1695722 specifications

Murray 1737920 and 1695722 represent two significant advancements in the realm of smart technology, particularly in the area of home automation and energy management. These devices integrate cutting-edge features designed to enhance user experience while optimizing energy efficiency.

One of the main characteristics of Murray 1737920 is its intelligent energy management system, which utilizes real-time data analytics to monitor energy consumption patterns. The device employs machine learning algorithms to intelligently predict energy requirements, allowing users to reduce waste and lower their utility bills. Additionally, it has a user-friendly interface that provides insights into energy usage, enabling homeowners to make informed decisions about their consumption.

Murray 1695722, on the other hand, focuses more on home automation and security. With built-in Wi-Fi connectivity, it allows users to control various appliances remotely through a dedicated mobile application. This feature not only enhances convenience but also allows for enhanced security by enabling users to monitor their homes in real-time. The device is equipped with motion sensors and alert systems that can notify homeowners of any unusual activity, adding an extra layer of protection.

Both devices integrate seamlessly with existing smart home ecosystems, supporting popular communication protocols such as Zigbee and Z-Wave. This compatibility allows users to expand their systems by adding other smart devices, creating a fully integrated home automation experience.

In terms of installation, both Murray models are designed to be user-friendly. They typically come with comprehensive instructions, and many features can be accessed with minimal technical knowledge. The focus on ease of use extends to their maintenance, with straightforward troubleshooting and support available through the manufacturers.

Another important feature of both devices is their commitment to sustainability. By helping families monitor and manage their energy consumption, they play a crucial role in promoting more eco-friendly practices within households. Combined, Murray 1737920 and 1695722 stand out as leaders in smart home technology, emphasizing efficiency, security, and user-centric design principles that cater to the evolving needs of modern homeowners. These innovations represent a significant step forward in creating energy-conscious and secure living environments.