Mustang Survival MSV971 manual Steps f. and g. Patching 12 mm 1/2

Mustang Survival MSV971 Life Preserver and Survival Vest

Description and Maintenance Instructions

9 June 2004, Rev: 1.0

e.Single-stitch the patch to the fabric 6 mm (¼ inch) from the edge of the hole (see figure 19).

Figure 19. Steps c., d. and e. Patching

Patch stitched to the outside layer of the liner

f.Roll an edge of the patch under itself and single-stitch approximately 12 mm (½ inch) from the original stitch.

g.Repeat this for each edge of the patch, until it is secured (see figure 20).

Figure 20. Steps f. and g. Patching

12 mm (1/2”)

h.Repair closely grouped small holes or tears with one large patch, rather than several small ones.

26	This document is for information purposes only. It is not a controlled
	document and may not be considered current when printed.