Step b. Patching | Mustang Survival MSV971 specs

Mustang Survival MSV971 Life Preserver and Survival Vest

Description and Maintenance Instructions

9 June 2004, Rev: 1.0

b.Cut a square, or rectangle, in the damaged fabric slightly larger than the hole (see figure 18).

Figure 18. Step b. Patching

c.Cut a patch of the original material being repaired, exceeding the hole in size by not less than 37 mm (1 ½ inch).

d.Apply the fabric patch to the outside layer of the protective container and ensure that the weave corresponds to that of the material surrounding the repair area.

25	This document is for information purposes only. It is not a controlled
	document and may not be considered current when printed.

Image 28

Mustang Survival MSV971 manual Step b. Patching

Contents

June 9, 2004, REV Table of Contents Table of Figures Vest Sizes Introduction Testing 5 Fit Features Design and ConstructionGeneral Assembled LP/SV Life Preserver Inflatable Cell Document and may not be considered current when printed Manual CO2 Inflation Device Beaded CO2 Inflation Handle Oral Inflator Protective Container Survival Vest Grommet Side Adjustment Straps Adjustable Waist BeltRescue Harness System Ballistic Liner Attachment Points Operation Component Locations Inflated Cell Donning and Packing Instructions General Folding and Packing Instructions Zipper Closing PositionSliders Step f. Folding and Packing Instructions Harness Loop Step j. Folding and Packing Instructions Step o. Folding and Packing Instructions Maintenance and Care CleaningTreatment After Immersion Fresh Water Immersion Service Life Maintenance ReportingWork Area Storage Inspection and Testing RequirementsPRE-FLIGHT and POST-FLIGHT Inspection Visual Inspection Maintenance Inspection Visual Inspection of the Inflatable Cell Oral Inflator Valve Test Inflation Manifold Valve TestInflatable Cell Test CO2 Cylinder Inspection and Weight Test CO2 Inflation Device Test Repairs Identification of DefectsSurvival Vest or Protective Container Sewing Repair Materials Damage TreatmentProtective Container Fabric Patching Step b. Patching Steps f. and g. Patching 12 mm 1/2 Oral Inflator Valve CO2 Inflation Device Step a. Replace Inflatable Cell Self-locking Tie Step g. Replace Inflatable Cell Self-locking Tie CO2 Cylinder Parts List Summary MSV971 Survival Vest and Index Numbers Parts List for the MSV971 Survival Vest MM Solas Reflective Tape MSV971 Inflatable Cell and Index Numbers MSV971 Protective Cover and Index Numbers