Mustang Survival MSV971 manual Step g. Replace Inflatable Cell Self-locking Tie, CO2 Cylinder

Mustang Survival MSV971 Life Preserver and Survival Vest

Description and Maintenance Instructions

9 June 2004, Rev: 1.0

f.Secure the last cord loop to the lacing anchor loop, by passing a new plastic self- locking tie through both loops, and cinching tightly. Carefully trim the excess tie ends.

Figure 23. Step g. Replace Inflatable Cell

Self-locking Tie

NOTE: Ensure that the plastic self-locking tie ends do not form a sharp point, which may puncture or abrade the inflatable cell.

g.Re-attach the survival vest anchor straps to the bottom of the cell lobes, ensuring that they pass through the lower opening in the protective container.

Figure 24. Step h. Replace Inflatable Cell

h.Re-pack the life preserver as detailed in section 3.2.

6.8CO2 CYLINDER

6.8.1The carbon dioxide (CO2) cylinder must be replaced when it fails the weight test as detailed in section 2.5, or when there is damage to the cylinder neck sealing disc, threads, or the surface of the cylinder.

29	This document is for information purposes only. It is not a controlled
	document and may not be considered current when printed.