Mustang Survival MSV971 Life Preserver and Survival Vest
Description and Maintenance Instructions
9 June 2004, Rev: 1.0
4.0MAINTENANCE AND CARE
4.1GENERAL
4.1.1After immersion in water (other than fresh clean water), the LP/SV modules should be either washed or rinsed separately. To increase the life of the garment, it is recommended to wash the LP/SV only when required.
4.2CLEANING
4.2.1Laundering Procedures NOTE: Do not dry clean.
Do not use bleach or other chlorine products. Do not use fabric softeners.
Do not tumble dry. Do not iron.
Do not dry in front of a radiator or other source of direct heat. Do not store in a wet condition.
a.Separate layers (Life Preserver and Survival Vest).
b.Ensure all pockets are emptied.
c.Hand wash or sponge down an area of the Life Preserver/Inflatable Cell fabric in warm (100°F) soapy (using mild laundry detergent) fresh water, then rinse with clean water. Do not completely immerse the Life Preserver/Inflatable Cell. If machine washing the Survival Vest, use the gentle cycle with a mild detergent or soap.
d.Hang to dry the layers in a
e.Reassemble the LP/SV.
4.2.1.1To avoid mildew, hang dry the LP/SV after every use, and be sure not to stow the product away while damp.
4.3TREATMENT AFTER IMMERSION
4.3.1Whenever a LP/SV has been immersed in water, it must be treated as specified below and then inspected in accordance with the current authorized servicing schedule.
4.3.2Fresh Water Immersion
4.3.2.1 Allow the LP/SV to dry naturally, preferably in the open air.
4.3.3Salt Water Immersion
4.3.3.1Disassemble the layers (Life Preserver and Survival Vest) and rinse thoroughly with clean, fresh water. Allow the LP/SV modules to dry naturally, preferably in the open air.
17 | This document is for information purposes only. It is not a controlled |
| document and may not be considered current when printed. |
