Mvix MX-760HD manual Transferring files to the Hard Disk through USB

Chapter 3: Basic Setup

3.23 Transferring files to the Hard Disk through USB

When connected to your PC, the Mvix Player works exactly like an external storage device (e.g. USB Flash drive).

1.Power OFF the Mvix Media Player

2.Connect the USB2.0 Slave Port to the USB Port of your PC via a USB2.0 A-B Cable.

3.Power ON the Mvix Media Player.

4.Your PC will recognize the new external USB drive**.

5.Simply drag and drop your media files from your PC to the Mvix Multimedia Player. It works exactly like any other external storage device.

**If your PC fails to recognize the Mvix Media Player when connected via USB, check the jumper settings on the installed HDD. Try and test the jumpers in the following order:

MASTER or SINGLE jumper setting

CABLE SELECT (CS) jumper setting

SLAVE jumper setting

Complete Remove all jumpers.

USB Host Functionality: The Mvix player also provides a USB-host port built upon a full speed, USB 2.0 compliant host/function processor. USB-host (also referred to as USB-OTGor USB-On-the-Go) allows communication between two USB devices. You can connect any external storage device (e.g. Flash drive) or an external DVD-ROM and play video files residing on these external devices. You can even connect your Digital Camera to directly transfer digital images/pictures from the camera to the HDD residing inside Mvix player.

Turn off your Mvix player before connecting your external device to the player.

Some 2.5” external-HDD may require additional power to the external HDD to be recognized. Use the AC-adapter included with your 2.5” external HDD to enable its use with the Mvix player.

X_ Unicorn Information System