N-Tron 702M12-W user manual Revision

The list can be updated using the Reload button.

N-TRON 702-W examines the destination IP address of each data packet traveling through the system and chooses the appropriate interface for packet forwarding. The system choice depends on static routing rules – entries, which are registered in the system routing table. Static routes to specific hosts, networks or default gateway are set up automatically according to the IP configuration of all the N-TRON 702-W interfaces.

N-TRON 702-W IP configuration description is provided in the Link Setup section.

Show Firewall selection lists active firewall entries in the FIREWALL chain of the standard ebtables filter table, while the device is operating in Bridge mode.

ATH0 - Wireless Interface

ETH0 - Lan/Wired Interface

BR0 - Bridge Interface of ATH and ETH when in bridge mode

PPP - Interface when utilizing a PPPOE connection

The list can be updated using the Reload button.

Active firewall entries in the FIREWALL chain of the standard iptables filter table are listed if the device is operating in Router mode.

IP and MAC level access control and packet filtering in N-TRON 702-W is implemented using iptables (routing) and ebtables (bridging) firewall which protects the resources of a private network from outside threats by preventing unauthorized access and filtering specified types of network communication.

More information is provided in the Link Setup section.

Show Port Forward selection shows ports forwarded to internal devices through NAT in router mode

Show DHCP Leases selection shows the current status of the leased IP addresses by the device’s DHCP server.

Interface name shows from which device interface DHCP client which has specified MAC Address is connected.

Remaining Lease time shows for how long the leased IP address will be valid and reserved for a particular DHCP client.

The list can be updated using the Reload button.

Revision 04062009 Page 24 of 52