N-Tron 702M12-W user manual NTP Client, Web Server, Telnet Server

NTP Client, Web Server, Telnet Server

NTP Client: The Network Time Protocol (NTP) is a protocol for synchronizing the clocks of computer systems over packet-switched, variable-latency data networks. It can be used to set the N-TRON 702-W internal clock.

Web Server: the following N-TRON 702-W Device Web Server parameters can be set:

Use Secure Connection (HTTPS): If checked Web server will use secure HTTPS mode. HTTP mode is selected by default.

Secure Server Port: Web Server TCP/IP port setting while using HTTPS mode.

Server Port: Web Server TCP/IP port setting while using HTTP mode.

Telnet Server: the following N-TRON 702-W Device Telnet Server parameters can be set: Enable Telnet Server: Enables Telnet access to the N-TRON 702-W Device. Server Port: Telnet service TCP/IP port setting.

System Log: Logs system information locally and/or to a remote logging server. Enable Log: Enables local logging for the device.

Enable Remote Log: Enables remote logging to a specified logging server.

Revision 04062009 Page 40 of 52