NAD L 53 owner manual Identification of controls

6IR IN: This input is connected to the output of an IR (infrared) repeater (Xantech or similar), or the IR output of another component to allow control of the L53 from a remote location. Ask your dealer or custom installer for further details.

7OPTICAL & COAXIAL IN: Connect to the coaxial/optical S/PDIF- format digital output of sources such as VCRs, HDTV or satellite tuners, or other components; connect IN OPTICAL/COAXIAL to an S/PDIF-format digital output. We recommend your source material be set to PCM 2-channel format for these digital inputs.

NOTE

•During power-on from standby, there may be a momentary mute of audio if CD/DVD-media is present in the L53's DVD tray, and either Coaxial or Optical inputs are in use. This feature is normal operation that allows the L53 to load the media's tables of contents and title menus into memory. To avoid this momentary mute of audio, remove the media from the L53's DVD tray before switching to standby.

8 OPTICAL OUT: Connect the OUT OPTICAL port to the corresponding S/PDIF digital input of a recording component such as a CD recorder, DAT deck, or computer soundcard.

9COMPONENT VIDEO OUT: Connect the L53’s “COMPONENT VIDEO OUT” to the component-video input of a compatible video monitor/TV. Be sure to observe consistency in connecting the Y/Cr/Cb jacks (some source and TV components label these Y/Pb/Pr) to the corresponding sources/inputs; do not rely purely on the colour coding of the jacks, which may not always be consistent among brands. The routing of the component-video output is fixed: “COMPONENT VIDEO OUT” jack will only display the internal DVD video signals.

NOTE

•The L53’s component-video output is a fully wide-band output, compatible with all HDTV formats. The L53 will display its on- screen menus on its component-video output.

Identification of controls

REAR PANEL

10 AC POWER CORD: Connect AC power cord to the Voltage according to the model, 120 V for US and 240 V for Euro models.

11SWITCHED AC OUTLET: This convenience jack can supply switched power to another component or accessory. It is powered on and off by the front panel POWER button (or the HTR L53’s ON and OFF buttons).

NOTE

•The total draw of all devices connected to this jack must not exceed 100 watts.

12 SCART/RGB VIDEO OUT (PAL only): Connect the L53’s “SCART/RGB VIDEO OUT” to the SCART/RGB video input of a compatible video monitor/TV. Be sure to observe the correct orientation of the SCART/RGB plug. The routing of the SCART/RGB input is fixed: the SCART/RGB VIDEO OUT” plug will only display the internal DVD video signals.

13 MONITOR OUT: Connect to video input of the monitor/television, using quality RCA and/or S-Video cables designed for video signals. In general, the S-Video connection is superior and should be used if your TV/monitor provides the corresponding input.

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

11