NAD L 54 owner manual Operation, Using the L, Region Management Information, About DVD/SVCD/VCD/CD

You may operate the L 54 DVD Receiver from its front panel or via the HTR 4 remote control. Since the remote will be the primary controller for most cases, we will focus on remote-controlled operations. Be sure also to read the section, “Front Panel”.

REGION MANAGEMENT INFORMATION

The L 54’s internal DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number shown on the back of the L 54 , the internal DVD player cannot play that disc.

ABOUT DVD/SVCD/VCD/CD

The L 54’s internal DVD/SVCD/VCD/CD player will play DVD, SVCD with or without PBC (Play Back Control), VCD, DivX and CDs including recorded MP3, copyright-protected WMA and JPEG files. To turn on or off PBC, toggle the “MENU” button on the HTR 4.

Note

You cannot playback discs other than those listed above such as Video, CD-CD-ROM, CD-Extra, CD‑G, photo-CD, and CD-i data discs. To do so may render the L 54 permanently inoperable.

DISC LOADING AND PLAYBACK

You can open the disc tray by pressing ‘STOP/OPEN’ button even if the L 54 is in standby mode. The power indicator will turn from blue to dark. Place a disc on the disc tray with the playback side down.

There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the L 54 to malfunction. ‘NO DISC’ appears on both the L 54’s display and the TV/monitor screen, if the disc is placed upside down (and it is a single sided disc).

The following are important tips when loading a disc

•Do not push the disc tray while it is moving. Doing so may cause the L 54 to malfunction

•Do not push up the disc tray or put any objects other than discs on the disc tray. Doing so may cause the L 54 to malfunction.

• Keep your fingers well clear of the disc tray as it is closing. Be especially careful with children’s fingers around the closing disc tray, as there is a risk of personal injury.

Press “PLAY/PAUSE”, the disc tray is automatically closed and playback begins. Press the HTR 4’s navigation buttons and then press “ENTER” or press the numeric button(s) to select the desired track (CD). Play of the selected item now begins (Depending on the DVD disc or other disc media, some operations may be different or restricted. Refer to the jacket or case of the disc you are playing).

Press the HTR 4’s “STOP” key during playback to display an audio CD’s total number of tracks and total playback time in the VFD.

If you insert a SVCD videodisc, the PBC symbol (Play Back Control) will appear in the L 54’s display and OSD. The “MENU” button on the HTR 4 will toggle on and off PBC.

After playing back all of the chapters in the title, L 54’s DVD player automatically stops and returns to the menu screen.

NOTE

Do not move the L 54 during playback. Doing so may damage the disc and the L 54.

Operation

USING THE L 54

ENGLISH

FRANÇAIS

ESPAÑOL NEDERLANDS DEUTSCH

ITALIANO

РУССКИЙ

SVENSKA

15