NAD L 54 owner manual Scan, Screen Saver, Video OUT, Divx Code

ENGLISH

FRANÇAIS

DEUTSCH NEDERLANDS ESPAÑOL

ITALIANO

РУССКИЙ

SVENSKA

Operation

USING THE L 54’S INTERNAL DVD PLAYER – SETUP MENU

P-SCAN

If your television is a high-definition or “digital ready” television, you may take advantage of the L 54’s progressive scan output for the highest video resolution possible.

To activate Progressive Scan, set first “VIDEO OUT” (see “VIDEO OUT” section below ) to “COMPONENT.” Then, select “ON” at “P-SCAN” menu to activate Progressive Scan output. Select “OFF” to maintain normal Component Video Output.

A direct way to turn off Progressive scan mode is to press and hold the front panel’s “DISPLAY” button until the “P.SCAN” icon at the VFD is extinguished.

SCREEN SAVER

When you set “SCREEN SAVER” to “ON”, a screen saver in the form of an NAD logo appears when you leave for about fifteen minutes the L 54’s internal DVD player at Stop or Pause mode. If the Screen Saver continues to be displayed for another ten minutes, the L 54 automatically turns itself off.

VIDEO OUT

Select among “S-VIDEO,”“COMPONENT” and “RGB” (European version model only) as your preferred video output media. Make sure the appropriate video out of L 54 is connected to the corresponding video input of your TV/monitor.

Note

•If “S-Video” is selected, there is no component video output and vice versa

•Component video out jack will only display the internal DVD video signals.

DIVX CODE

DivX is the name of a revolutionary new video codec which is based on the new MPEG-4 compression standard for video. You will be able to play DivX discs using the L 54’s internal DVD player. The Registration code details necessary for VOD (Video-On- Demand) service can be shown by pressing “DISPLAY.”

18