NAD owner manual OPERATION OF THE M55, Introduction, After Operation

Models: M55

1 38
Download 38 pages 53.72 Kb
Page 12
Image 12
Operation

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA

Operation

OPERATION OF THE M55

INTRODUCTION

When you want to play back DVD-Video discs and DVD-Audio or audio CDs, turn on your A/V audio system and the TV and then select the video input source connected to the DVD player.

Set the playback picture size according to the aspect ratio of the connected TV in the setup OSD menus.

Switch ON the POWER rocker switch, then the front panel Standby button.. The M55-power indicator becomes blue.

Press OPEN/CLOSE. The disc tray opens.

You can open the disc tray by pressing this button even if the DVD player is in standby mode. The power indicator will turn from amber to blue.

Place a disc on the disc tray with the playback side down.

There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the M55 to malfunction.

Press PLAY. The disc tray is automatically closed and playback begins.

If the disc is placed in upside down (and it is a single sided disc), NO DISC will appear on the M55’s display and ‘NO DISC’ appears on the TV screen.

If you insert an audio CD, the total tracks and time will appear.

After playing back all of the chapters in the title, M55 automatically stops and returns to the menu screen.

Press the navigation keys then and press ENTER, or press the numeric button(s), to select the

desired item. Play of the selected item now begins.

• For further information, also refer to the jacket or case of the disc you are playing.

AFTER OPERATION

When the unit is not in use, remove the disc and press the OFF button on the remote to switch the M55 to standby. If the M55 is left unattended for any length of time such as during a vacation, then switch off the M55 by depressing the black rocker switch marked POWER ON/OFF found on the rear of the M55.

NOTES

Do not move the DVD player during playback. Doing so may damage the disc and the M55.

Use the OPEN/CLOSE button on the M55 or OPERATION OF THE M55 on the remote control to open and close the disc tray.

Do not push or pull the disc tray while it is moving. Doing so may cause the M55 to malfunction.

Do not push up the disc tray or put any objects other than discs on the disc tray. Doing so may cause the M55 to malfunction.

Keep your fingers well clear of the disc tray as it is closing. Be especially careful with children’s fingers around the closing disc tray, as there is a risk of personal injury.

Depending on the DVD disc, some operations may be different or restricted. Refer to the jacket or case of the disc you are playing.

12

Page 12
Image 12
NAD Operation, OPERATION OF THE M55, Introduction, Place a disc on the disc tray with the playback side down