NAD M55 owner manual Connecting To An Analogue Stereo System, Setup, To Enjoy Good Quality Sound

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA

Setup

CONNECTING TO AN ANALOGUE STEREO SYSTEM

Good quality sound of 2-Channel Stereo system can be achieved by connecting this DVD player to a receiver equipped with a two analogue audio inputs (right and left) and speaker system (right and left front speakers).

S-VIDEO / Component / Composite

From S-VIDEO / Component Video /75–Ohm coaxial or SCART cable

Composite or SCART

From the MIXED AUDIO OUT	To S-VIDEO / Component /
	Composite or SCART
(L & R) Jacks	inputs of the TV.

Audio cable

TV or monitor with audio/visual inputs

To the analogue input (L & R) amplifier equipped with analogue inputs.

Audio system

TO ENJOY GOOD QUALITY SOUND

Downmix allows a multichannel program to be reproduced over fewer speaker channels than for which the program is optimally intended. Simply put, down-mixing allows you to enjoy a 5.1 or 7.1 channel media regardless of how many speakers you have.

In Downmix, the analog stereo output is one of two different stereo down-mixes. One type is a surround-compatible Downmix (Left-total/Right-total, or Lt/Rt) of the multichannel source suitable for Dolby Pro Logic II, Dolby Pro Logic IIx, or other matrix decoding. The other type is a simple stereo Downmix suitable for playback on a two-channel stereo system or on headphones.

From the Setup OSD, you need to select, Audio, Downmix, and then ‘Stereo’ for a two channel stereo system.

NOTES

•Refer to the owner’s manual of your receiver as well.

•Before you connect the M55 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•Depending on your Digital sound decoder, the decode rate may be 96 kHz or 48 kHz.

•The output sound of the M55 has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

•Turn off the receiver before you connect or disconnect the M55’s power cord. If you leave the receiver power on, the speakers may be damaged.

24