NAD M55 Dolby PRO Logic Surround Sound, Deutsch Français English, Italiano Español Nederlands

Setup

CONNECTING TO A SURROUND SOUND SYSTEM

DOLBY PRO LOGIC SURROUND SOUND

One can enjoy the high quality sound of Dolby Pro Logic Surround Sound if your A/V receiver is equipped with a Dolby Pro Logic Surround Sound processor or decoder.

To enjoy Dolby Pro Logic sound from this DVD player you need the following:

•DVD recorded in Dolby Pro Logic format.

•Dolby Pro Logic A/V receiver equipped with a Dolby Pro Logic decoder, or Dolby Pro Logic decoder and power amplifier

•5 speakers

Connection example

From the

MIXED AUDIO L/R jacks

75-Ohm audio cables

To RCA audio input jacks of the surround sound receiver equipped with a Dolby Pro Logic decoder To audio input

From S-VIDEO / Component Video /

Composite or SCART

S-VIDEO / Component / Composite 75–Ohm coaxial or SCART cable

To S-VIDEO / Component / Composite or

SCART inputs of the receiver

DEUTSCH FRANÇAIS ENGLISH

Front Speaker	TV
(left)
	Rear speaker (left)

Centre speaker	Front speaker
	(right)
TV
	Rear speaker (right)

ITALIANO ESPAÑOL NEDERLANDS

WITH A RECEIVER EQUIPPED WITH A DOLBY PROLOGIC DECODER

Connect the Speakers and receiver equipment the same way as described in Enjoying Dolby Digital Sound. Then connect two channel 75 Ohm audio cables as above. Refer to that A/V receiver’s owner’s manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.

You must select a type is a surround-compatible Downmix (Left-total/Right-total, or Lt/Rt) of the multichannel source suitable for Dolby Pro Logic II, Dolby Pro Logic IIx, or other matrix decoding. From the Setup OSD, you need to select, Audio, Downmix, and then ‘Lt/Rt’ for multi-channel matrix decoding.

WARNING

Do not connect the Digital Audio Output of this DVD player to your receiver unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital or DTS decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Selecting Digital Audio Output. (Refer to Initial Setup Settings, Audio)

NOTES

Refer to the owner’s manual of your audio equipment as well. When you connect the M55 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. The output sound of the M55 has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or disconnect the M55’s power cord. If you leave the receiver power on, the speakers may be damaged.

SVENSKA PORTUGUÊS

21