Napoleon Fireplaces BGNV40-N Brick Panel Installation, Facing, Finishing, Step, STEP DETAIL5

BRICK PANEL INSTALLATION

Install the base panels as illustrated in steps 1-4 . The side panel sits under the bracket tab. Holding the side panel in position, bend down the tab to secure. DETAIL 5.

FIGURES10a-e

STEP 1

STEP 2

STEP 3

9

FACING

Combustible materials may be installed flush with the front of the fireplace but must not cover any of the black face- areas of the fireplace. Non-combustible material (brick, stone or ceramic tile) may protrude in these areas.

It is not necessary to install a hearth extension with this fireplace system.

When roughing in the fireplace, raise the fireplace to ac- commodate for the thickness of the finished floor materi- als, i.e. tile, carpeting, hard wood, which if not planned for will interfere with the opening of the lower access door and

the installation of many decorative flashing accessories.

Objects placed in front of the fireplace should be kept a minimum of 48" away from the glass front faces.

FIGURE11

DRYWALL

DRYWALL

4" MIN

FINISHING

Refer to pages 14-17 for complete instructions regarding mantle requirements and installations, log placement, glass door and upper and lower louvre attachments.

STEP 4

RETAINER

STEP 5

DETAIL5

W415-0320 / D / 01.06.07