General Instructions

This gas fireplace should be installed and serviced by a qualified installer to conform with local codes. Installation practices vary from region to region and it is important to know the specifics that apply to your area,

for example: in Massachusetts State:

•The fireplace damper must be removed or welded in the open position prior to installation of a fireplace insert or gas log.

•The appliance off valve must be a “T” handle gas cock.

•The flexible connector must not be longer than 36 inches.

•The appliance is not approved for installation in a bedroom or bathroom unless the unit is a direct vent sealed combustion product.

•WARNING: This product must be installed by a licensed plumber or gas fitter when installed within the commonwealth of

Massachusetts.

In absence of local codes, install to the current CAN/CGA - B149 Installation Code in Canada or to the National Fuel Gas Code, ANSI Z223.1, and NFPA 54 in the United States. Suitable for mobile home installation if installed in accordance with the current standard CAN/CSA Z240MH Series, for gas equipped mobile homes, in Canada or ANSI Z223.1 and NFPA 54 in the United States.

The fireplace and its individual shutoff valve must be discon- nected from the gas supply piping system during any pres- sure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa). The fireplace must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).

When the fireplace is installed directly on carpeting, vinyl tile or other combustible material other than wood flooring, the fireplace shall be installed on a metal or wood panel extend- ing the full width and depth.

The optional heat circulating blower is supplied with a cord. If installed, the junction box must be electrically connected and grounded in accordance with local codes. In the absence of local codes, use the current CSA C22.1 CANADIAN ELEC- TRICAL CODE in Canada or the ANSI/NFPA 70 NATIONAL ELECTRICAL CODE in the United States.

Mobile home installation must conform with local codes. In the absence of local codes, install to the current standard for gas equipped mobile housing CAN/CSA Z240 MH Se- ries in Canada or the manufactured home construction and safety standard, Title 24 CFR, part 3280, or the Fire Safety Criteria for manufactured home installations, Sites and Community Standard ANSI/NFPA 5OIA in the United States.

GENERAL INFORMATION

FOR YOUR SATISFACTION, THIS FIREPLACE HAS BEEN TEST-FIRED TO ASSURE ITS OPERATION AND QUAL- ITY! Maximum input is 45,000 BTU/hr for natural gas and 40,000BTU/hr for propane. When the fireplace is installed at elevations above 4,500ft, and in the absence of specific recommendations from the local authority having jurisdic- tion, the certified high altitude input rating shall be reduced at the rate of 4% for each additional 1,000ft. Maximum out- put for natural gas is 36,900 BTU/hr at an efficiency of 82% with the fan on, 78.4% with the fan off; and 33,200 BTU/hr for propane at an efficiency of 83% with the fan on, 80% with the fan off. Minimum A.F.U.E. (Annual Fuel Utilization Efficiency) rating is 64%.

Minimum inlet gas supply pressure is 4.5 inches water column for natural gas and 11 inches water column for propane. Maximum inlet gas pressure is 7 inches water column for natural gas and 13 inches water column for propane. Manifold pressure under flow conditions is 3.5 inches water column for natural gas and 10 inches water column for propane.

This fireplace is approved for bathroom, bedroom and bed- sitting room installations and is suitable for mobile home installation.

No external electricity (110 volts or 24 volts) is required for the gas system operation.

Expansion / contraction noises during heating up and cool- ing down cycles are normal and are to be expected. Change in flame appearance from "HI" to "LO" is more evident in natural gas than in propane.

CARE OF GLASS, AND PLATED PARTS

Do not use abrasive cleaners to clean plated parts. Buff lightly with a clean dry cloth. The glass is 3/16" ceramic glass avail- able from your Napoleon / Wolf Steel Ltd. dealer. DO NOT SUBSTITUTE MATERIALS. Clean the glass after the first 10 hours of operation with a recommended gas fireplace glass cleaner. Thereafter clean as required. DO NOT CLEAN GLASS WHEN HOT! If the glass is not kept clean permanent discol- ouration and / or blemishes may result.

Provide adequate ventilation and combustion air. Pro- vide adequate accessibility clearance for servicing and operating the fireplace.

Never obstruct the front opening of the fireplace.

Objects placed in front of the fireplace must be kept a minimum of 48" away from the front face of the unit.

FIGURE 1

W415-0100 / D / 01.13.04

GD45-N, GD45-P specifications

The Napoleon Fireplaces GD45-P and GD45-N are two standout models in the realm of contemporary gas fireplaces, beautifully integrating style with advanced technology and functionality. Designed to cater to modern living spaces, both models boast a sleek design that fits seamlessly into various home aesthetics, making them a popular choice among homeowners and designers alike.

One of the main features of the GD45-P and GD45-N is their impressive heating capability. With a robust output of up to 40,000 BTUs, these fireplaces are not only visually striking but also efficient in providing warmth during colder months. They are well-suited for large rooms, ensuring that family gatherings can be enjoyed in a cozy environment.

The Napoleon GD45 series employs cutting-edge technology to enhance usability and performance. One such technology is the advanced electronic ignition system, which ensures that starting the fireplace is as simple as pressing a button. The fireplaces also include a variable flame control option, allowing users to adjust the height and intensity of the flames for ambiance as well as heating needs. This feature provides a customizable experience, allowing homeowners to create the perfect atmosphere for any occasion.

Another significant aspect of the GD45-P and GD45-N is their emphasis on efficiency. Operating with an impressive 78% energy efficiency rating, these units are designed to minimize heat loss, keeping energy costs manageable while maximizing comfort. Furthermore, they are equipped with a unique dual burner system, which enhances flame realism and creates a mesmerizing effect that mimics the comfort of traditional wood-burning fireplaces.

Both models feature an extensive selection of decorative options, including a range of fire media like ceramic stones and crystal glass, which allow users to tailor the appearance of the fireplace to their personal taste. The glass front design also maximizes viewing area, ensuring the beauty of the flames can be enjoyed from various angles in the room.

Installation is streamlined with the GD45-P and GD45-N, thanks to their direct venting design. This means that venting can be executed easily through walls or ceilings, providing flexible installation options that accommodate various home layouts.

In summary, Napoleon Fireplaces GD45-P and GD45-N represent the perfect fusion of aesthetics, efficiency, and technological innovation. With exceptional heating capabilities, customizable flame options, and a variety of installation possibilities, these fireplaces are an inviting addition to any modern home. Their striking design paired with functional features ensures they stand out as both a heating solution and a stylish focal point within any living space.

Napoleon Fireplaces GD45-N, GD45-P manual General Instructions, General Information

Models: GD45-N GD45-P