National Instruments NI 5412 Calibration, Power

NI 5412 Specifications 18 ni.com

CalibrationPower

Table 10.

Specification Valu e Comments

Self-Calibration An onboard, 24-bit ADC and precision voltage reference are

used to calibrate the DC gain and offset. The self-calibration

is initiated by the user through the software and takes

approximately 75 seconds to complete.

—

External

Calibration

The External Calibration calibrates the VCXO, voltage

reference, DC gain, and offset. Appropriate constants are

stored in nonvolatile memory.

—

Calibration

Interval

Specifications valid within 2 years of External Calibration. —

Warm-up Time 15 minutes —

Table 11.

Specification Normal Operation Overload Operation Comments

Total Power 22 W 26 W Typical.

Overload

operation occurs

when CH 0 is

shorted to

ground.

Contents

Main NI 5412 Specifications NI PXI/PCI-5412 14-Bit 100 MS/s Arbitrary Waveform Generator Contents CH 0 (Channel 0 Analog Output, Front Panel Connector) Page Page Figure 1. Pulse Response, Low-Gain Amplifier Path 50 Load Page Sample Clock Page Page Onboard Clock (Internal VCXO) Phase-Locked Loop (PLL) Reference Clock CLK IN (Sample Clock and Reference Clock Input, Front Panel Connector) PFI 0 and PFI 1 (Programmable Function Interface, Front Panel Connectors) Start Trigger Page Markers Waveform and Instruction Memory Utilization Page Calibration Power Software Environment NI PXI-5412 Environment NI PCI-5412 Environment Safety, Electromagnetic Compatibility, and CE Compliance Page Physical Where to Go for Support