Chapter1 Introduction
©NationalInstruments Corporation 1-3 RTSeries DAQ DeviceUser Manual
Unpacking
YourRT Series DAQ device is shipped in an anti static package to prevent
electrostaticdamage to the device. Electrostatic discharge can damage
several components on the device. To avoid such damage in handling the
device, take the following precautions:
•Groundyoursel fby using a grounding strap or by holding a grounded
object.
•Touchthe antistatic package to a metal part of your computer chassis
before removingt he devicefrom the package.
•Removethe device from the package and inspect the device for
loose components or any other sign of damage. Notify National
Instrumentsif the device appears damaged in any way. Do not install
adamaged device into your computer.
•Nevert ouch the exposedpi ns of connectors.
Software Programming Choices
Usethe RT Series DAQ devices with LabVIEW RT and NI-DAQ. Because
NI-DAQ is included with LabVIEW RT, install NI-DAQ during the
LabVIEWRT installation. Refer to the LabVIEW Real-Time Release Notes
for specific information about LabVIEW RT and NI-DAQ version
compatibility. Refer to Chapter 2, Installation and Configuration,
for information about installing your RT Series hardware.