Navigon MN7 user manual Changing the starting point, Entering route points

User’s manual MN7 PDA

currently at the planned starting point. This is why your selected starting point has the flow number "0".

As soon as you start navigation, your current location will be used as the starting point for the route calculation.

The first leg of the route is therefore the journey to the route point with flow number "1".

1.Tap on the Specify Starting Point box. The STARTING POINT menu opens.

If you want to enter your current location as the starting point: 2. Tap on the Current Position menu item.

If you want to enter a different starting point:

2.Tap on the corresponding button.

3.Enter the starting point. (Refer to the corresponding section of chapter "Specifying a destination" on page 21 ff.)

4.Tap on Set Starting Point.

The selected starting point will now be displayed next to the 0 button (Starting Point).

Changing the starting point

►Tap on the Specify Starting Point box.

The STARTING POINT menu opens. You can now enter a different starting point. Proceed as described above.

4.4.2Entering route points

The route points of a route are the destinations that you want to navigate to.

The flow number for each route point is indicated on a button in front of it.

1.Tap on the Add Route Point box. The ROUTE POINT menu opens.

2.Tap on the button for how you want to enter the destination.

3.Enter the route point. (Refer to the corresponding section of chapter "Specifying a destination" on page 21 ff.)

4.Tap on Add.

The selected route point is now shown next to its flow number.

Repeat these steps for each destination that you want to add to your route.

Navigation - 31 -