User’s manual MN7 PDA
►Tap on the large arrow box to hear current route instructions.
6Ahead of many junctions the information from 7 and 8 is hidden. Instead you are shown which lanes lead to your destination.
7The height above sea level and the current speed are shown here.
8The remaining distance to the destination, the estimated trip time and the estimated time of arrival can be seen in the Total field.
9Your current position is indicated on the map (orange arrow). The section of the map displayed changes continually so that your current position is always in view on the map.
10If you are navigating a
11The name of the route section that you need to drive onto next is shown in the upper road box.
12The name of the section you are currently driving on is shown in the lower road box.
Note: The displays of many of the above mentioned areas can be configured in Options > Settings > Basic Settings. Some displays will only function if the required information is available on the map.
Note: If you tap on the large arrow box, the current route instruction will be repeated.
►Tap on Options >
►Tap on (Destination search) in order to view the map in Destination search mode. (Refer to "Map in Destination search mode" on page 42)
Volume
The volume of the spoken driving instructions can be adjusted during navigation.
1.Tap on (Volume).
The volume bar opens. It contains three buttons for adjusting the volume.
(Louder), (Quieter), (Volume on/off).
2.Tap on (Volume) again or wait a few seconds. The volume bar closes.
- 40 - | Navigation |