Navigon MN7 2.6 Activation , 2.7 Connecting the GPS receiver

User’s manual MN7 PDA

Before you begin - 11 -

2.6 Activation

If the automatic activation by SMS fails to work or if you have re-

installed the navigation software on a different memory card, then you

must activate the full version of the navigation software (or any

additional purchased maps) manually.

1. Start the navigation software on your PDA.

2. Tap in the TRY & BUY window on Options > Enter Activation Code.

- OR -

In the MAIN MENU window tap on Options > Activate > Options >

Enter Activation Code.

3. Enter the activation code which you received by SMS.

4. Tap on Next.

A corresponding message appears if the activation process was

successful.

5. Tap on OK.

2.7 Connecting the GPS receiver

Note: To navigate with MN7 PDA you need a GPS receiver which

supports the NMEA protocol.

This type of GPS receiver may already be integrated in your PDA.

Please refer to your PDA manual.

You may have purchased MN7 PDA as part of a package which

includes the required components.

Otherwise you can purchase such a receiver from a specialist dealer.

► Connect the GPS receiver if it has to be connected to the PDA with

a cable and possibly to a power source.

► If the GPS receiver is not integrated in the PDA, switch it on and

position it as far forward as possible under the windscreen, flat

against the dashboard.

Configuring GPS

When you start MN7 PDA for the first time, the GPS CONFIGURATION

window opens up. You can undertake the GPS configuration manually,

or use a wizard.

This configuration will be applied to each subsequent start of MN7 PDA.

If you want to use a different GPS receiver, then you will have to repeat

the configuration process.

Tap on Options > GPS Status > Settings to go to the GPS configuration

screen.

Contents

Main Users manual MN7 PDA Page Table of contents Page Page 1 Introduction 1.1 About this manual 1.1.1 Conventions 1.1.2 Symbols 1.2 Legal notice 2 Before you begin 2.1 Installing the software 2.1.1 Preconditions 2.1.2 Installation Software on DVD Software as a download 2.2 Two modes of operation 2.2.1 Test mode 2.2.2 Full version 2.3 Working with the test version 2.4 Registering and activating the full version 2.5 Upgrading the test version to a full version 2.6 Activation 2.7 Connecting the GPS receiver Configuring GPS 2.8 Installing the hardware in a vehicle 2.9 Power supply for the PDA and GPS receiver 2.10 Navigating with GPS 2.11 Important safety information 2.11.1 Navigation safety information 2.11.2 Safety information for external GPS receivers 2.11.3 Safety guidelines when installing the device in your car 3 Operating the navigation software 3.1 Volume 3.2 Information GPS Energy 3.3 Software keyboard 3.3.1 Special keys 3.3.2 Entering data 3.4 Options 3.5 Menus 4 Navigation 4.1 Starting MN7 PDA 4.1.1 Initialising the GPS receiver Returning to the Main Menu window 4.2 Specifying a destination 4.2.1 Specifying the country in which the destination is situated 4.2.2 Entering an address 4.2.3 Points of interest POI nearby POI of nationwide significance POI in a particular location Direct access to POI 4.2.4 Information about the destination 4.2.5 Last Destinations 4.2.6 Favourites 4.2.7 Navigating home 4.2.8 Imported addresses 4.2.9 Selecting destinations on the map 4.2.10 Starting navigation Route Profile Turn-by-Turn List Start Navigation 4.3 Managing destinations 4.3.1 Saving destinations 4.3.2 Defining a destination as home address 4.4 Multi-leg routes 4.4.1 Entering the starting point Changing the starting point 4.4.2 Entering route points 4.4.3 Editing route points 4.4.4 Managing routes Saving routes Loading routes 4.4.5 Calculating and displaying routes 4.4.6 Simulating routes Stopping simulation 4.4.7 Starting navigation Route Profile 4.5 Options in the navigation application Page 4.6 Working with the map 4.6.1 Maps 4.6.2 Selecting a map 4.6.3 Activating an additional map 4.6.4 Map in Preview mode Page 4.6.5 Map in Navigation mode Volume Quitting navigation Functions of the map in Navigation mode 4.6.6 Reality View 4.6.7 Map in Destination search mode Page Operating in Destination search mode 4.7 Useful functions 4.7.1 Emergency Services 4.7.2 GPS Status, saving the current location 4.7.3 Block Unblocking a route section 4.7.4 Turn-by-Turn List Blocking route sections Removing blocks and using original routes 4.7.5 TMC (Traffic Information) Displaying traffic information TMC Settings 4.7.6 Logbook Recording trips Before a trip 5 Services 5.1 Weather Service 5.2 HRS Hotel Reservation Service 6 Configuring the MN7 PDA Page 7 Index B C D E N O P R S T U V W