JVC GY-HD200E/CHE Alarm Message Display, Switching between the LCD Screen and Viewfinder Display

CONTROLS, INDICATORS AND CONNECTORS

Indications on the LCD Monitor and in the Viewfinder (Cont’d)

Auto White Balance Indication (Camera mode only)

The AUTO WHITE indication and the result of the operation are dis- played during the auto white balance adjustment operation.

X See “White Balance Adjustment” on page 51.

Alarm Message Display

•The following alarm messages are displayed while the STA- TUS (0, 1, 4) screen is shown in the Camera mode, or a STA- TUS screen is shown in the VTR mode.

If an alarm is generated while the STATUS 2, 3 screen is shown, the STATUS 0 screen returns to display the alarm. X See page 102.

•When an abnormality occurs in the VTR, a warning message with an error code is displayed.

X See pages 102-104.

SAFETY ZONE				2.35:1CE			2.35:1CH
CENTER MARK			OFF		ON	OFF		ON
DV-60I	4:3	Cannot be selected
DV-50I
DV-24P
DV-24PA	16:9
DV-25P
HDV-HD60P
HDV-HD50P
HDV-HD30P	[16:9]
HDV-HD25P
HDV-HD24P

Switching between the LCD Screen and Viewfinder Display

„When the LCD+VF item in the LCD/VF[4/4] menu is set to OFF, the LCD monitor and viewfinder (VF) displays are as shown below.

Alarm display area

Menu Setting Screen

Screen used for making various settings.

The Menu Setting Screen appears when the STATUS button is pressed for 1 second or more.

X See “Setting Menu Screens” on page 72.

TOP MENU screen (Camera mode)

Safety Zone Indication (Camera mode only)

The indication of the following safety zone and center mark indications can be turned ON/OFF with the SAFETY ZONE item and CEN- TER MARK item on the LCD/VF[1/4] menu screen. X See page 86.

In addition, the safety zone display is on or off depending on the REC item setting and the ASPECT item setting in the VIDEO FOR- MAT[1/2] menu screen, as shown below.

SAFETY ZONE

OFF

4:3

14:9

16:9

16:9+4:3

CENTER MARK

-

OFF

ON

OFF

ON

OFF

ON

OFF

ON

REC

ASPECT

DV-60I

DV-50I

4:3

Cannot be selected

DV-24P

DV-24PA

DV-25P

16:9

HDV-HD60P

HDV-HD50P

HDV-HD30P

[16:9]

HDV-HD25P

HDV-HD24P

LCD Monitor Status		LCD Display	VF Display
LCD Closed	Normal LCD	OFF	ON
	Inverted LCD	ON	OFF
LCD Open	Normal LCD	ON	OFF
	Inverted LCD	ON	OFF

MEMO

•You can switch between the LCD monitor and the view- finder by holding down the DISPLAY button for about 2 seconds.

•After you set up the function that switches the display between the LCD monitor and the viewfinder by holding down the DISPLAY button, the display mode is cancelled by the LCD monitor open/close and normal/inverted operations.

•If the LCD monitor is closed inside this device with the screen in the normal display orientation, holding down the DISPLAY button does not work.

„When the LCD+VF item in the LCD/VF[4/4] menu is set to ON, the LCD monitor and viewfinder (VF) displays are as shown below.

LCD Monitor Status		LCD Display	VF Display
LCD Closed	Normal LCD	OFF	ON
	Inverted LCD	ON	ON
LCD Open	Normal LCD	ON	ON
	Inverted LCD	ON	ON

MEMO

•Press the DISPLAY button for 2 seconds to switch the LCD screen display ON and OFF.

•The viewfinder screen is always displayed.

DISPLAY button

Normal LCD

Inverted LCD

LCD open 40° or more

LCD close less than 40°

30 31