32
PREPARATIONS
Basic System
*1An HZ-FM13 cannot be used with a Th16 × 5.5BRMU or S14 × 7.3B12/U zoom lens.
Use a FUJINON focus manual unit (FMM-8, CFH-3, CFC-12-990).
For details, please consult your JVC authorized dealer.
MACRO
USER 3USER 2USER 1
STATUS
MENU
2
1
ND FILTER
REC
OFF
ON
POWER
WHT.BAL
AUTO
AUDIO
LEVEL
AUTO
CH-1 CH-2
VF BRIGHT
CALLTALLY
INTERCOM
LEVEL
FULL AUTOF1
SHUTTER
GAIN
F2
F3MENU/SHUTTER GAIN PAINT AUTO
BR
W.BAL
AUTO
MANU
WHITE MASTER BLACK POWER
I
O
IRIS
STEP
SHUTTER
MENUPUSH-ON
DOWNUP
VARIABLE
PUSH-ON
HIGH
LOW
B
A
PRESET
CLOSEOPEN
MID
DOWNUP
F4
BARS
REMOTE CONTROL UNIT RM-P210
Shoulder Belt
Earphone
Microphone XLR 3P
Focus Manual Unit
*1 HZ-FM13 (FUJINON)
HZ-FM15 (CANON)
1/3 Zoom Lens
Th13 × 3.5BRMU (FUJINON)
Wide Converter
WCV-82SC
Focus Manual Unit
*1
Zoom Servo Unit
HZ-ZS13B
1/2 Zoom Lens
S14 × 7.3B12U (FUJINON)
S17 × 6.6BRM (FUJINON)
S20 × 6.4B12U (FUJINON)
YH16 × 7K12U (CANON)
YH19 × 6.7K12U (CANON)
2/3 Zoom Lens
Microphone
1/3 Zoom Lens
Th16 × 5.5BRMU (FUJINON)
(Excluding the CHU/CHE model)
GY-HD250/GY-HD251
Standard Package
Mount Converter
(1/2r1/3): ACM-12
(2/3r1/3): ACM-17
Carrying Case
GY-HD250/GY-HD251
SD Memory Card
XLR 4P
AC Adapter AC
Tripod
Dolly
Composite Cable
RCA pin
Audio Cable
RCA pin
Headset
DT109 (Beyerdynamic)
IEEE1394 Cable
6P-6P
Monitor
DV VTR
Non-linear Editing System
BR-HD50
Tripod Base (U model only)
For GY-HD251
Anton Bauer
Battery
Remote Control Unit
RM-LP55/RM-LP57
IDX
Battery Charger
HDD Unit
DR-HD100
Component Cable
BNC
View Finder
VF-P400
View Finder
DM-3106 (Astrodesign)
V-R70P-HAD (Marshall Electronics)
GY-HD250: Gold Mount
GY-HD251: V Mount
Battery mount
Monitor
Camera Remote Control Unit
RM-P210
HD-SD Cable
BNC
Monitor
Studio Kit
KA-HD250
IDX (Endura)
Battery
Anton Bauer
Battery Charger
For GY-HD250
33
Attaching the Zoom Lens
1.Loosen the mount ring.
2.Attach the lens with its pin aligned with the hole in the
mount.
3.Tighten the mount ring.
4.Connect the cable connector.
5.Clamp the lens cable.
CAUTION
• Be sure to tighten the mount ring completely. Incomplete
tightening may result in the lens dropping off or disturbed
back focus.
• Set the GY-HD250/GY-HD251’s power switch to “OFF”
before the zoom lens is attached or detached.
Attaching the Microphone (Provided)
Connect the provided microphone to the microphone holder.
Provided microphone is a phantom microphone.
1.Turn the knob on the microphone holder anticlockwise to
loosen it and open the microphone holder.
2.Place the microphone in the microphone holder.
Place the microphone toward the front to prevent it from
interfering with the cassette cover.
3.Turn the knob on the microphone holder clockwise to
secure the microphone.
4.Connect the microphone cable to the INPUT1 or INPUT2
input connector on the GY-HD250/GY-HD251.
5.Attach the microphone cable to the clamp.
6.Make sure to perform the correct setting for use of a
phantom microphone.
XSeepage 56.
How to Attach the View-finder
1.To attach the viewfinder, slide it in the direction of the
arrow.
2.Set the viewfinder to a comfortable position and then turn
the slide mounting ring and mount.
To take off the viewfinder, pull the knob in the direction of
the arrow as you slide the viewfinder.
Pin
Hole
Clamp

1. 3. Knob 2.Microphone

Microphone
holder
5. Clamp
4.INPUT1, 2 connector
Knob
Taking off the viewfinder
1.
2. Slide mounting ring