CONTROLS, INDICATORS AND CONNECTORS
16
Left Side Section
1Viewfinder connector (6-pin)
Connect the cable from the viewfinder here.
2[CH-2 INPUT] CH-2 audio input connector selector
switch
Selects the CH-2 audio input connector.
MEMO
The audio from the INPUT1 connector is also input into
CH-1 regardless of the setting.
3[AUDIO INPUT] Audio input signal selector switch
This switch is used to select the input sound signal from
INPUT1 or INPUT2 connector.
CAUTION
When connecting a component that does not require +48 V
power supply, make sure that the switch is not set to
MIC+48V before the component is connected.
MEMO
You can select the normal input level for MIC and MIC+48V
in the INPUT1, 2 MIC REF. item on the AUDIO/MIC[1/2]
menu screen.
XSeepage 84.
4[INPUT1/INPUT2] INPUT1/INPUT2 audio input connec-
tors
These are audio input connectors for connecting to an
external audio device or microphone.
•Set the [AUDIO INPUT] switch 3 according to the
device to be connected.
•Set the CH-2 audio input connector using the [CH-2
INPUT] switch 2.
The CH-2 audio from the set connector is recorded.
5Shoulder pad slide button
Button to adjust the position of the shoulder pad.
When you press this button, you can move the position of
the shoulder pad 6 forward or backward.
6Shoulder pad
7Cassette cover
Sliding the EJECT switch a on page 18 located on the
top section opens this cover to allow insertion or removal
of the videocassette.
CAUTION
To prevent foreign objects from entering the internal parts of
the VTR unit, do not leave this device with the cover open
for extended periods of time.
8[VIDEO OUT] Video output terminal (RCA)
This is a terminal for composite video signal output.
•Select whether or not to output a signal with setup in
SET UP on the VIDEO FORMAT[2/2] menu screen.
(Only for U model)
•Set ANALOG OUT CHAR. item on the OTHERS[1/2]
menu screen to ON to output menu setting screens and
warnings from this terminal.
9[AUDIO OUTPUT CH-1/CH-2] Audio output connector
(RCA)
Output connector for audio signals.
•Outputs the input audio signal in the Camera mode.
•Outputs the playback audio signal in the VTR mode.
•When a HDV/DV signal (IEEE1394) is input, the EE
sound of the input audio signal is output in the VTR
mode. (HDV/DV signal input is possible with the
GYHD200U/GY-HD201E.)
MEMO
Alarm sound is not output.
0[IEEE1394] IEEE1394 connector (6-pin)
Using an IEEE1394 cable (optional), a digital video com-
ponent with IEEE1394 connector can be connected here.
XSee“Connecting the IEEE1394 Cable” on page63.
XSee“HDV/DV Dubbing” on page 65.
CAUTION
When connecting the IEEE1394 cable, confirm that the
connector is facing the right direction before inserting.
XSeepage 63.
MEMO
Put the covers on the connectors when you are not using
them.
INPUT1 :Inputs the audio from the INPUT1 connector
4 into CH-2.
INPUT2 :Inputs the audio from the INPUT2 connector
4 into CH-2.
LINE :Set to this position when connected to audio
equipment, etc. The reference input level is
+4 dBs.
MIC : Set to this position when the dynamic micro-
phone is connected.
MIC+48V : Set to this position when a microphone
requiring +48 V power supply (phantom
microphone, etc.) is connected.
IEEE 1394
CH2-AUDIO OUT-CH1 VIDEO
0
987
1
2
3
456
17
a[IEEE1394] IEEE1394 switch
Set according to the image format of the input/output sig-
nal and playback signal of the IEEE1394 terminal.
HDV :Set to this for HDV format.
DV : Set to this for DV format.
b[Y/PB/PR] Component Y/PB/PR signal output terminal
(BNC × 3)
Outputs analog component (Y/PB/PR) signals.
•Select whether or not to add setup signals to DV format
signals in SET UP item on the VIDEO FORMAT[2/2]
menu screen. (Only for U model)
•Set ANALOG OUT CHAR. item on the OTHERS[1/2]
menu screen to ON to output menu setting screens and
warnings from this terminal.
c[REMOTE] REMOTE terminal (Round 6-pin)
Some functions of this camera can be controlled exter-
nally.
Connect to a remote control unit (RM-LP55/RM-LP57).
XSee“Connect a Remote Control Unit (RM-LP55/RM-
LP57)” onpage 68.
d[DC INPUT] DC input terminal (XLR 4-pin)
This is the 12V DC power input terminal. Connect to the
AC adapter.
When a battery is installed and a cable is connected to this
terminal, power supply from the battery stops and power is
supplied by this terminal.
IEEE 1394
CH2-AUDIO OUT-CH1 VIDEO
b
c
d
a