CONTROLS, INDICATORS AND CONNECTORS
30
Indications on the LCD Monitor
and in the Viewfinder (Cont’d)
Auto White Balance Indication (Camera mode only)
The AUTO WHITE indication and the result of the operation are dis-
played during the auto white balance adjustment operation.
XSee“White Balance Adjustment” on page 52.
Menu Setting Screen
Screen used for making various settings.
The Menu Setting Screen appears when the STATUS button is
pressed for 1 second or more.
XSee“Setting Menu Screens” on page 75.
Alarm Message Display
• The following alarm messages are displayed while the STA-
TUS (0, 1, 4) screen is shown in the Camera mode, or a STA-
TUS screen is shown in the VTR mode.
If an alarm is generated while the STATUS 2, 3 screen is
shown, the STATUS 0 screen returns to display the alarm.
XSeepage 106.
• When an abnormality occurs in the VTR, a warning message
with an error code is displayed.
XSeepages 106-108.
Safety Zone Indication (Camera mode only)
The indication of the following safety zone and center mark indications can be turned ON/OFF with the SAFETY ZONE item and CEN-
TER MARK item on the LCD/VF[1/4] menu screen. XSeepage89.
In addition, the safety zone display is on or off depending on the REC item setting and the ASPECT item setting in the VIDEO FORMAT
menu screen, as shown below.
TOP MENU screen (Camera mode)
Alarm display area
SAFETY ZONE OFF 4:3 14:9 16:9 16:9+4:3
CENTER MARK - OFF ON OFF ON OFF ON OFF ON
REC ASPECT
Cannot be selected
DV-60I
DV-50I
DV-24P
DV-24PA
DV-25P
4:3
16:9
HDV-HD60P
HDV-HD50P
HDV-HD30P
HDV-HD25P
HDV-HD24P
[16:9]
31
Switching between the LCD Screen and Viewfinder Display
When the LCD+VF item in the LCD/VF[4/4] menu is set to
OFF, the LCD monitor and viewfinder (VF) displays are as
shown below.
MEMO
• You can switch between the LCD monitor and the view-
finder by holding down the DISPLAY button for about 2
seconds.
• After you set up the function that switches the display
between the LCD monitor and the viewfinder by holding
down the DISPLAY button, the display mode is cancelled
by the LCD monitor open/close and normal/inverted
operations.
• If the LCD monitor is closed inside this device with the
screen in the normal display orientation, holding down
the DISPLAY button does not work.
When the LCD+VF item in the LCD/VF[4/4] menu is set to
ON, the LCD monitor and viewfinder (VF) displays are as
shown below.
MEMO
• Press the DISPLAY button for 2 seconds to switch the
LCD screen display ON and OFF.
• The viewfinder screen is always displayed.
SAFETY ZONE 2.35:1CE 2.35:1CH
CENTER MARK OFF ON OFF ON
DV-60I
DV-50I
DV-24P
DV-24PA
DV-25P
4:3 Cannot be selected
16:9
HDV-HD60P
HDV-HD50P
HDV-HD30P
HDV-HD25P
HDV-HD24P
[16:9]
LCD Monitor Status LCD Display VF Display
LCD Closed Normal LCD OFF ON
Inverted LCD ON OFF
LCD Open Normal LCD ON OFF
Inverted LCD ON OFF
LCD Monitor Status LCD Display VF Display
LCD Closed Normal LCD OFF ON
Inverted LCD ON ON
LCD Open Normal LCD ON ON
Inverted LCD ON ON
DISPLAY button
Normal LCD
Inverted LCD
LCD open 40° or
more LCD close less
than 40°