MENU SCREENS
94
HEADER REC Menu
Screen

The HEADER REC menu screen is used for settings related to the HEADER REC function. XSeepage60.

Item Function/Setting (bold characters indicate initial settings)
START KEY Sets whether the HEADER REC operation should be executed when the REC/VTR trigger button is pressed while
the STOP button is pressed.
DISABLE :HEADER REC operation is not executed.
STOP+REC :HEADER REC operation is executed.
TC DATA Sets the time code value for the point when the Record-Standby mode is engaged following completion of HEADER
REC.
EXECUTE :Confirms the set time code.
ZERO PRESET :Resets all time codes to “0”.
CANCEL :Clears the set time code.
The frame mode is set depending on the setting in the DROP FRAME item on the TC/UB/CLOCK menu screen.
*The time code value at the point when the Record-Standby mode is engaged may differ some frames from the val-
ue set for this item.
UB DATA Sets the user’s bits of the HEADER REC section.
EXECUTE :Confirms the set user’s bits.
ZERO PRESET :Resets all user’s bits data to “0”.
CANCEL :Clears the set user’s bits.
MEMO
•The user’s bits for the normal recording section are set on the TC/UB/CLOCK menu screen.
•When the “UB REC” item is set to “OFF”, “--------” is displayed and this cannot be selected.
BARS TIME Sets the duration (seconds) in which the color bar signal and test tone (1 kHz) is recorded during HEADER REC. (1-
sec steps)
[Settings: 0SEC - 30SEC - 99SEC]
BLACK TIME Sets the duration (seconds) in which the black signal is recorded during HEADER REC. (1-sec steps)
[Settings: 0SEC - 30SEC - 99SEC]
PAGE BACK The TC/UB/CLOCK menu screen returns when the SHUTTER dial is pressed.
95
TIME/DATE Menu Screen
Item Function/Setting (bold characters indicate initial settings)
DISPLAY Sets whether the date and time are shown in the status display on the LCD monitor or in the viewfinder.
OFF :Not displayed.
ON :Displayed.
When a tape with time and date not recorded is played back, there will be no display of time and date even when
this item is set to ON.
DISPLAY MODE In the Camera mode, the date and time are displayed in accordance with the following settings.
The date and time recorded on a tape are displayed in accordance with the following settings.
BARS+CAM :Date and time are always displayed.
BARS :Date and time are displayed when the color bars are output.
CAM : Date and time are displayed when the camera images are output.
When the DISPLAY item is set to OFF, “- - -” is indicated and this item cannot be selected.
DISPLAY STYLE Selects the style for the date and time display.
DATE+TIME :Date and time are displayed.
DATE :Date only is displayed.
TIME : Time only is displayed.
When the DISPLAY item is set to OFF, “- - -” is indicated and this item cannot be selected.
DATE STYLE Selects the style for the date display.
YY/MM/DD : Displayed in the format of year/month/date.
MM/DD/YY : Displayed in the format of month/date/year.
DD/MM/YY : Displayed in the format of date/month/year.
Variation Range: U model: MM/DD/YY E model: DD/MM/YY
When the DISPLAY item is set to OFF, “- - -” is indicated and this item cannot be selected.
TIME STYLE Selects the style for the time display.
24 HOUR :Displays the time using the 24-hour system.
12 HOUR :Displays the time using the 12-hour system.
When the DISPLAY item is set to OFF, “- - -” is indicated and this item cannot be selected.
SEC DISPLAY Selects whether to display the seconds in the time display.
ON :Seconds are displayed.
OFF :Seconds are not displayed.
When the DISPLAY item is set to OFF, “- - -” is indicated and this item cannot be selected.
TIME SHIFT Sets the clock OFFSET time. (1H steps)
Adds time to the built-in clock (time compensation) and displays it. The adjusted time is also recorded on the tape.
[Settings: –23H - –1H, OFF, +1H - +23H]
CLOCK ADJUST To adjust the date and time, align the cursor with this position and then press the SHUTTER dial.
The date and time are set on the CLOCK ADJUST screen.
XSee“Setting the Date and Time” on page 42.
PAGE BACK The TC/UB/CLOCK menu returns when the SHUTTER dial is pressed while the cursor is at this position.