FEATURES OF THE CAMERA SECTION

How to Use Skin Detail (Cont’d)

Using the Skin Detail Function

To use the skin detail function set on the SKIN COLOR ADJUST screen, select “ON” for the SKIN DETECT item on the CAMERA PROCESS[1/2] menu screen.

In addition, you can use the LEVEL item to set three levels of suppression of skin color area detail enhancement in the video signal. X See page 81.

While the skin detail function operates, the “SD” indicator is displayed on the STATUS 0 and STATUS 1 screen in the viewfinder or LCD monitor.

“SD” display

STATUS 0

Confirming the color tone area adjusted with the Skin Detail function

When you push the ZEBRA switch on the front panel to “SKIN AREA”, the skin detail function turns ON, and the color area adjusted with the skin detail function is displayed in color in the LCD monitor or viewfinder.

ZEBRA switch

MEMO

When the REVERSE PICTURE item in the CAMERA PROCESS[2/2] menu screen is set to ROTATE, skin detail function is available but the detection area is not displayed in the viewfinder or LCD screen.

When COLOR GAIN item on the ADVANCED PRO- CESS menu screen is set to “OFF”, only the portion the skin detail function is working is displayed in skin color.

X See page 83.

Outputting Color Bars

GY-HD250/GY-HD251 can output three types of color bars, depending on the camera settings.

NTSC standard

: Outputs

color

bars

compliant

with

the

 

SMPTE standard.

 

 

 

PAL standard

: Outputs

color

bars

compliant

with

the

 

EBU standard.

 

 

 

16:9 screen

: Outputs multi-format color bars.

 

 

To output color bars, make the following settings.

1.Turn the FULL AUTO switch to “OFF”.

2.Set the BARS item on the CAMERA OPERATION menu screen to “ON”. X See page 80.

• Color bars are output.

FULL AUTO switch

USER button

„Outputting color bars using the USER buttons 1. Turn the FULL AUTO switch to “OFF”.

2.Assign “BARS” to one of the USER1, 2 or 3 buttons. X See “SWITCH MODE Menu Screen” on page 86.

3.Press the USER button to which “BARS” was assigned.

• Color bars are output.

MEMO

You can select whether to output an audio test signal during color bar output using the TEST TONE item on the AUDIO/MIC[1/2] menu screen. X See page 87.

Color bars are not output when FULL AUTO mode is ON or in VTR mode.

104

105

Page 112
Image 112
JVC GY-HD200U/CHU, GY-HD200E/CHE, GY-HD201E/CHE manual 104 105, Outputting Color Bars