JVC GY-HD201E/CHE Video FORMAT2/2 Menu Screen, Auto, Initial settings U model 7.5% E model 0.0%

MENU SCREENS

VIDEO FORMAT[2/2] Menu

Screen

* This is not displayed in VTR mode.

Item		Function/Setting (bold characters indicate initial settings)
PB TAPE	Selects whether to automatically detect the playback tape video format or play back only a particular format.
	Normally, use the “AUTO” setting.
	AUTO	: During tape playback, the format signal is switched automatically and played back.
	DV	: During tape playback, only the part of the tape recorded in DV format is played back.
	HDV	: During tape playback, only the part of the tape recorded in HDV format is played back.
	DVCAM	: During tape playback, only the part of the tape recorded in DVCAM format is played back.
	MEMO
	If you play back a tape containing both DV and HDV formats, the video signal is disturbed when the signal is
	switched.
SET UP	Selects whether to add a setup signal to the composite signal from the VIDEO OUT terminal.
	In DV format, a setup signal can be added to COMPONENT output.
	* You can also select a setup signal in the IEEE1394 signal input mode.
	0.0%	: No setup signal is added.
	7.5%	: A setup signal is added.
	Initial settings: U model: 7.5% E model: 0.0%
	MEMO
	When the FRAME RATE item is set to 50/25, this item is not displayed.
PAGE BACK	When the cursor is in this position, press the SHUTTER dial to the VIDEO FORMAT[1/2] menu screen.

CAMERA OPERATION

Menu Screen

The CAMERA OPERATION menu screen is only displayed in the Camera mode.

Item		Function/Setting (bold characters indicate initial settings)
AE LEVEL*1	For adjusting the image level when using auto iris, “ALC” or “EEI”.
	Increase value	: Increases level.
	Decrease value : Decreases level.
	[Settings: –3, –2 - NORMAL (0) - 2, 3]
ALC MAX	Sets the maximum “ALC” value to automatically change the signal intensity level depending on the brightness.
	[Setting: 6 dB, 12 dB, 18 dB]
PRESET TEMP.	Sets the basic color temperature when the [WHT.BAL] white balance selector switch c on page 15 is in the PRST
	(PRESET) position.
	3200K	: Sets the basic color temperature to 3200K. (Use for light sources with a low color temperature,
		such as halogen lamps.)
	5600K	: Sets the basic color temperature to 5600K. (Use for light sources with a high color temperature,
		such as sunlight.)
	MEMO
	This item does not function when the FAW item on the SWITCH MODE menu screen is set to “PRESET”.
SMOOTH TRANS*1	Smoothens the transition when the [GAIN] switch b on page 15, or [WHT.BAL] switch c on page 15 is switched
	over and achieves gradual change in place of sudden change.
	However, the smooth transition function does not function when switching the [GAIN] switch set in ALC, FULL AUTO
	ON.
	OFF	: Deactivates the smooth transition function.
	ON	: Activates the smooth transition function.
BARS*1	Sets whether or not color bars are output. (This is fixed at “OFF” when in FULL AUTO mode)
	OFF	: Color bars are not output.
	ON	: Color bars are output.
PAGE BACK	The TOP MENU returns when the SHUTTER dial is pressed with the cursor at this position.

*1 REMOTE appears as the setting value of this item when the remote control unit is connected.

76 77