JVC GY-HD201E/CHE, GY-HD200E/CHE, GY-HD200U/CHU manual Ext, Ndf

CONTROLS, INDICATORS AND CONNECTORS

Indications on the LCD Monitor and in the Viewfinder (Cont’d)

Status Screen in VTR MODE

1	2
	3

No.	Item	Contents
8	Time/Date indication	Recorded data are displayed during playback, fast forward, and rewind.
		During recording in DV format, the data from the IEEE1394 connector is displayed.
		During recording in HDV format, the data of internal clock is displayed.
		Whether or not the date and time should be displayed and the display style are set on the TIME/DATE
		menu screen. X See page 95.
		When the date and time have not been set, the following indication appears.
		- -/- -/- - - -: - -: - -
9	Voltage indication	(Example) 12.2V : Indicates remaining battery level in 0.1V steps.
		Battery voltage and remaining battery are displayed. Select the display method in BATTERY INFO. on the
		LCD/VF[1/2] menu screen X See page 91.
		Anton Bauer battery: Voltage/remaining capacity (%)/remaining time
		IDX Endura battery : Voltage/remaining capacity (%)
0	Audio Lock indication	Displayed when the audio signal from DV recording or playback is locked to the video signal.

4
5		0
6			9
7	8

No.	Item	Contents
1	VIDEO FORMAT display	Displays the video format recorded on the tape when in VTR mode. Also displays the video format of the
		HDV/DV input signal.
		You can switch this display ON/OFF using the VIDEO FORMAT item on the LCD/VF[1/2] menu screen.
		X See page 91.
2	Time code (TC) and user’s bits	Displays the time code data being recorded (hour, minute, second, frame) when in VTR mode.
	(UB) display	You can switch this display ON/OFF using the TC/UB item on the LCD/VF[1/2] menu screen.
		X See page 91.
		You can select to display either the time code or the user’s bits using the TC DISPLAY switch in the LCD
		door.
3	Remaining tape time	Remaining tape indication (displayed in 1-minute steps)
		This indicator blinks when remaining tape time is equivalent to less than 3 minutes.

Magnified Status Indications on the

LCD Monitor

The characters on the status screens can be showed alone in magnified size on the LCD monitor.

DISPLAY button

2

3

1

4

266S DD 5

		Whether or not to display this item is set with the TAPE REMAIN item on the LCD/VF[1/2] menu screen.
		X See page 91.
		* When inserting a brand-new tape, the remaining tape time is not indicated.
		When the tape has been run, the indication will appear.
		* The remaining tape indication is to be used only as a guide.
		* When this device is used at low temperatures, it may take a while before the indication of the remaining
		tape time appears.
4	Event display	Displays messages related to VTR operations. X See pages 106-108.
5 Audio sampling frequency in-		The audio sampling frequency used for the recording is displayed during playback.
	dication	(32 K, 48 K, 44.1 K)
		Whether or not to display this item is set with the AUDIO item on the LCD/VF[1/2] menu screen.
		X See page 91.
6 Audio level meter indication		Displays the audio level meters during playback.
		Whether or not to display this item is set with the AUDIO item on the LCD/VF[1/2] menu screen.
		X See page 91.
7	VTR mode indication	Indicates the VTR operation status
		STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, - - - (No tape loaded), SLOW: During variable play-
		back in forward direction (Displayed when using non-linear editing software.)
		(SLOW+1: About ×0.1 speed, SLOW+2: About ×0.2 speed, SLOW+3: About ×0.5 speed)
		During variable playback in reverse direction (Displayed when using non-linear editing software.)
		(SLOW–1: About ×–0.1 speed, SLOW–2: About ×–0.2 speed, SLOW–3: About ×–0.5 speed)

1.Set the LCD+VF item on the LCD/VF[4/4] menu screen to ON. X See page 92.

2.When the DISPLAY button is briefly pressed while the LCD monitor is displayed, the displayed contents change every time the DISPLAY button is pressed.

Only image displayed Characters shown enlarged

Image and characters displayed

No.	Item		Contents
1	Audio Lock Indicator	Displayed during recording and playback when the audio signal is locked to the video signal.
2	Time Code Generator Setting	Indicates the set status of the TC GENE switch on the side section.
	Indicator	FREE : TC GENE switch is set to PRESET-FREE RUN MODE.
		RECR : TC GENE switch is set to PRESET-REC RUN MODE.
		REGN : TC GENE switch is set to REGEN MODE.
		DUPL : There is 1394 input in VTR mode and TC DUPLI. menu is set to ON.
		EXT	: Displays when time code is input to the TC IN terminal.
			(When TCG SOURCE on the TC/UB/CLOCK menu screen is set to EXTERNAL.)
3	Drop/Non-drop Indicator	Indicates the framing mode of the time code.
		DF	: Drop frame mode
		NDF	: Non-drop frame mode
4	Synchronized display with an	Lights up when the time code generator of this device synchronizes with the time code input from the TC
	external time code generator	IN terminal. Blinks when synchronization is unsuccessful. Turns off If there is no input signal.
5	Indication of DR-HD100 Oper-	When a DR-HD100 (HDD unit by FOCUS enhancements) is connected, its operation status is displayed.
	ation	(For details, refer to the DR-HD100 INSTRUCTION MANUAL.)

MEMO

When characters indicating the status are displayed in magnified size on the LCD monitor, the viewfinder display the image.

28 29