MENU SCREENS
90
TC/UB/CLOCK Menu Screen
Time codes (TC) and user’s bits (UB) can be set on this screen. Date and time is set on the TIME/DATE screen that can be
reached from this screen.
*1 This can be displayed and selected when 60/30 is set for the FRAME RATE item on the VIDEO FORMAT menu screen.
(When 24 is set, this is fixed at “NON DROP” and “[NON DROP]” is displayed.)
*2 This can be displayed and selected when 50/25 is set for the FRAME RATE item on the VIDEO FORMAT menu screen.
Item Function/Setting (bold characters indicate initial settings)
TC PRESET To preset the time code, align the cursor with this position and then press the SHUTTER dial.
EXECUTE :The set time code is confirmed.
CANCEL :The set time code is cancelled.
ZERO PRESET :Resets all time codes to “0”.
UB PRESET To preset the user’s bit data, align the cursor with this position and then press the SHUTTER dial.
EXECUTE :The set user’s bit data are confirmed.
CANCEL :The set user’s bit data are cancelled.
ZERO PRESET :Resets all user’s bits data to “0”.
MEMO
When the “UB REC” item is set to “OFF”, “--------” is displayed and this cannot be selected.
DROP FRAME *1 Selects whether the time code generator framing mode is drop-frame or non-drop-frame.
DROP :Internal time code generator works in drop-frame mode. Set this when the recorded time is im-
portant.
NON DROP :Internal time code generator works in non-drop-frame mode. Set this when the number of frames
is important.
UB REC *2 To select whether or not user’s bit data should be recorded.
To select whether the user’s bits should be displayed during playback of a tape with recorded user’s bits data.
ON :User’s bits are recorded during recording.
User’s bits are displayed during playback.
OFF :User’s bits are not recorded during recording.
User’s bits are not displayed during playback.
TC DUPLI. Sets how to record the time code (TC) and user’s bits (UB) during IEEE1394 input of HDV/DV format.
OFF :Records the TC/UB set in this device.
ON :Records the TC/UB of the IEEE1394 input.
MEMO
In HDV format, the UB set in this device is recorded regardless of the setting.
HEADER REC.. To make settings related to the HEADER REC function, align the cursor with this position, and then press the SHUT-
TER dial.
XSee“HEADER REC Menu Screen” onpage91.
TIME/DATE.. To make settings related to the date and time, align the cursor with this position and then press the SHUTTER dial.
XSee“TIME/DATE Menu Screen” onpage 92.
PAGE BACK When the cursor is in t his position, press the SHUTTER dial to return to the TOP MENU screen.
91
HEADER REC Menu Screen
The HEADER REC menu screen is used for settings related to the HEADER REC function. XSeepage59.
Item Function/Setting (bold characters indicate initial settings)
START KEY Sets whether the HEADER REC operation should be executed when the REC/VTR trigger button is pressed while
the STOP button is pressed.
DISABLE :HEADER REC operation is not executed.
STOP+REC :HEADER REC operation is executed.
TC DATA Sets the time code value for the point when the Record-Standby mode is engaged following completion of HEADER
REC.
EXECUTE :Confirms the set time code.
ZERO PRESET :Resets all time codes to “0”.
CANCEL :Clears the set time code.
The frame mode is set depending on the setting in the DROP FRAME item on the TC/UB/CLOCK menu screen.
*The time code value at the point when the Record-Standby mode is engaged may differ some frames from the val-
ue set for this item.
UB DATA Sets the user’s bits of the HEADER REC section.
EXECUTE :Confirms the set user’s bits.
ZERO PRESET :Resets all user’s bits data to “0”.
CANCEL :Clears the set user’s bits.
MEMO
•The user’s bits for the normal recording section are set on the TC/UB/CLOCK menu screen.
•When the “UB REC” item is set to “OFF”, “--------” is displayed and this cannot be selected.
BARS TIME Sets the duration (seconds) in which the color bar signal and test tone (1 kHz) is recorded during HEADER REC. (1-
sec steps)
[Settings: 0SEC - 30SEC - 99SEC]
BLACK TIME Sets the duration (seconds) in which the black signal is recorded during HEADER REC. (1-sec steps)
[Settings: 0SEC - 30SEC - 99SEC]
PAGE BACK The TC/UB/CLOCK menu screen returns when the SHUTTER dial is pressed.