2.Slide the Side Cover off the lower half of the Checkstand Base.
3.In the desired location on the countertop drill four 6 mm (0.25 in.) holes for the mounting bolts and one 38 mm (1.5 in.) hole for the DynaKey cable(s). Use the Checkstand Base as a template for locating the holes.
4.Bolt the Checkstand Base (Lower Half) to the countertop.
5.Remove the Thumbscrew and the Front Cover from the Checkstand Base (Upper Half).
Checkstand Base
(Upper Half)
Front Cover
Thumbscrew
17322
