NEC 5224 manual Swap, Call Forward

To add a call on Hold to an existing conversation or conference:

1.Press the AddHeld softkey.

2.Press the flashing line key.

Swap

To call another party when you are in an established two–party call:

1.Press ( TRANS/CONF ).

2.Dial the number.

To alternate between the two parties:

•Press the Swap/Trade feature key or the Trade softkey.

Call Forward

Call Forward lets you redirect incoming calls to an alternate number.You can select one of the following forwarding options:

•Always redirects all incoming calls regardless of the state of your telephone.

•B–Intredirects internal calls when your telephone is busy.

•B–Extredirects external calls when your telephone is busy.

•NA–Intredirects internal calls after several rings if you don't answer.

•NA–Extredirects external calls after several rings if you don't answer.

Note: For information about "I'm Here?", see Call Forward – Remote.

To program Call Forward:

1.Press ( SUPERKEY ).

2.Press # or the No softkey until "Call Forwarding?" appears.

3.Press * or the Yes softkey .

4.Press # or the Next softkey until the type of Call Forward that you want to set up appears (see above).

5.On a 5224 IP Phone only, press the Review softkey.

6.If a number is already programmed, press * or the Change softkey .

21