NEC Cell Phone manual Do the following on the PC, Data exchange, 101

To Establish a Dial-up Connection to a PC using a USB Cable

Do the following on your 338:

This service is currently not available in the UK.

To		Do this
1	Connect the 338 and the PC with a USB	Insert the USB cable to the I/O connector of the 338 and the USB
	cable	connector on the PC.
		The USB cable and PC CD software for the 338 are available as
		optional accessories from 3.
		Insert the USB cable vertically to the 338 (do not insert it at an
		angle).
2	Dial up	From the PC application, start the dial-up. A connection is established.
3	Disconnect	Disconnect from the PC application.

Do the following on the PC:

Please ensure your 338 and the PC are connected via USB cable before proceeding.

To		Do this
1	Add a new connection on PC	Using Microsoft Dial-Up Networking, add a new connection ensuring the
		device used to make the connection is the NEC 338 Modem.
		Also ensure that the telephone number to dial is set to *99#
		This procedure only needs to be performed once.
2	Dial	Connect using this dial-up connection
3	Start the Internet communication	After connection is made, start up and use the appropriate Internet
		application (browser, mailer, instant messenger, etc.)

Data exchange

Data exchange is used to allow the transfer of data files between the phone memory and a PC.

To use this functionality, you must first install the 338 PC File Transfer Tool. To install the software, refer to the Software manual on the optional CD-ROM accessory.

You cannot use any other applications while data is being exchanged between your 338 and a PC.

-101- Connecting your 338 to a PC