NEC Cell Phone manual To Change to Insert/Overwrite Mode, To Copy, Cut, Delete or Replace text

To change to delete/backspace mode, press the Options menu key, Editing options, then Delete or Backspace in Clear mode.

In Delete mode, you can delete characters after the cursor. In Backspace mode, you can delete characters before the cursor.

To Change to Insert/Overwrite Mode

To change to insert/overwrite mode, press the Options menu key, Editing options, then Insert or Overwrite in Write mode.

To Copy, Cut, Delete or Replace text

To copy, cut, delete or replace a block of text, use the Copy/cut/others function. Before performing a specific function, specify the text block:

To		Do this
1	Specify the starting point	Move the cursor to the starting point using the 4-way navigation key.
2	Activate Copy/cut/other	Press and hold the	key or press the Options menu key and then select
		"Copy/cut/other".
3	Specify the ending point	Move the cursor to the end using the 4-way navigation key.

The text block is specified. Do one of the following:

To	Do this
Copy	Press SK1(Copy), or press the Options menu key and select Copy.
Cut	Press SK2(Cut), or press the Options menu key and select Cut.
Delete	Press the Options menu key and select Delete.
Replace	Press the Options menu key and select Replace. As a result, the selected text is
	replace by the text on a clip board.

To paste cut/copied text

To paste cut/copied text, move the cursor using the 4-way navigation key to a specific point, and then press and hold the key and press SK2 (Paste), or press the Options menu key and select Paste.

You can paste copied/cut text into other applications.

Entering Text -36-