NEC Cell Phone To Transfer Data between the phone and a PC, To perform local USB synchronisation

Please note that certain recurring appointments are not supported by this phone and as such may not be created on the phone during data exchange.

To Transfer Data between the phone and a PC

You can only do this from your PC.

To		Do this
1	Connect your 338 and the PC	Insert the USB cable to the I/O connector of your 338 and a USB
		connector on the PC.
2	Run PC File Transfer Tool	Start the 338 PC File Transfer Tool application on the PC.
		The data exchange function activates on your phone.
3	Transfer data between your 338 and the PC	See the 338 PC File Transfer Tool section in the Software Manual on the
		optional CD-ROM (available as an accessory) for specific instructions.

Synchronisation

It is possible to synchronise your Calendar, Contacts and To Do lists locally between your 338 and a PC using a USB cable or remotely over-the-air with a 3 server.

Please check that this service is supported by your service provider - contact 3 for further details.

Before attempting synchronisation by using a USB cable, it is necessary to install the ‘Intellisync’ software onto your PC. The CD and USB cable are both available as optional accessories.

Intellisync software is supported by Intellisync Corporation. For further instructions on Intellisync software, visit their web site: http://www.intellisync.com

Please check that over-the-air synchronisation is supported by your service provider - contact 3 for further details. Contacts are treated as vCard files and Calendar and To Do list entries as vCalendar files.

To perform local USB synchronisation

Optional CD-ROM is necessary. This is available as an accessory and contains a software manual with all necessary instructions.

To perform OTA remote synchronisation

To perform over-the-air remote synchronisation with a "3" server, follow the steps below:

To	Do this
1 Start the connection	Press the MENU key Æ Synchronisation.

Connecting your 338 to a PC -102-