NEC DTR-IR-2 user manual Temporarily Muting the Ringer, Mute Microphone, Tone Dialing Switch-over

Temporarily Muting the Ringer

You can mute the ringer on a handset. When the phone is ringing, pressing the MUTE soft key. This mute will last for the current incoming call only. The ringer tone will return to the previous setting on the next incoming call.

note While charging the handset, you can not mute the ringer tone for the handset.

Mute Microphone

You can temporarily mute the microphone so that the caller cannot hear you. Press the MUTE soft key during talk mode (while the phone is in use) to mute the microphone. Mute On and appear in the display. To cancel muting, press the MUTE soft key again. Mute Off appears.

6CNMߦ

/WVG1P



/76'24+8#%;

Tone Dialing Switch-over

If your telephone company requires pulse dialing, you can switch-over to tone dialing after the call connects. This feature is useful when you need tone dialing to use any automated menu systems, such as telephone bank tellers, telephone prescription refills, customer support menus, etc.

If your phone is set to pulse dialing mode, make your call normally. Once your call connects, press the */tone/< key. Any digits you enter from then on will be sent as tone digits. When this particular call ends, the phone automatically returns to pulse dialing mode.

Traveling Out of Range

During a call, as you begin to move your handset too far from your base unit, noise may increase. If you pass the range limits of the base unit, you will hear a beep and see Out of Range on the display, and then the handset returns to standby mode.

Privacy Mode

Privacy Mode prevents interruption from other registered handsets. This works only when the phone is in use.

Press the PRIVACY soft key on the handset during talk mode.

Privacy Mode On and appear in the display. To exit the Privacy Mode, press the PRIVACY soft key again when the Privacy Mode is on. Privacy Mode Off appears.

6CNM 2TKXCE[/QFG1P



/76'24+8#%;

B a s i c s [ 1 7 ]