E - 18 | Troubleshooting/Support |
Problem | Check These Items |
|
|
LED on the monitor is not lit (no | Power Switch should be in the ON |
green, orange or yellow color can be | position and the power cord should |
seen) | be connected. |
|
|
Picture is fuzzy | Adjust the Brightness, then Contrast |
| Controls. Access the Degauss Control |
| through OSM. Activate the Degauss |
| Control. CAUTION: A minimum |
| interval of 20 minutes should exist |
| before the Degauss Function is used a |
| second time. |
|
|
Picture bounces or a waving pattern | Move electrical devices that may be |
is present in the picture | causing electrical interference away |
| from the monitor. |
|
|
Edges of the display image are not | Use the OSM Geometry Controls to |
square | straighten the edges. |
|
|
Display image is not centered, too | Use the OSM Size and Position |
smaIl, or too large | controls to adjust the image. |
|
|
Color looks blotchy | Adjust the Brightness, then Contrast |
| Controls. Access the Degauss Control |
| through OSM. Activate the Degauss |
| Control. CAUTION: A minimum |
| interval of 20 minutes should exist |
| before the Degauss Function is used a |
| second time. |
|
|
|
|
