Mounting on Wall or Ceiling
DO NOT mount the monitor yourself. Please ask dealer.
For proper installation it is strongly recommended you use a trained, qualified technician.
Please inspect the location where the unit is to be mounted. Not all walls or ceilings are capable of supporting the weight of the unit.
Product warranty does not cover damage caused by improper installation, remodeling, or natural disasters. Failure to follow these recommendations could result in voiding the warranty.
To insure safe installation, use two or more brackets to mount the unit to at least two points on the installation location.
Please note the following when mounting on wall or ceiling | Unit | Mounting |
¥ When using mounting accessories other than NEC compliant and approved, they must |
| Bracket |
comply with the |
|
|
¥NEC strongly recommends using screws M8 size (15mm + bracket). If using screws longer
than 15mm, check the depth of the hole. (Recommended Fasten Force: |
|
|
|
|
|
| Screw |
|
|
|
|
|
|
| |
NEC recommends using mounting interfaces that comply with UL1678 standard in | 15mm |
|
|
|
|
| Thickness |
|
|
|
|
| |||
North America. |
|
|
|
|
|
| |
|
|
|
|
|
| of Bracket | |
|
|
|
|
|
|
|
¥ | Mounting on wall or ceiling is the customerÕs responsibility. | Screw length should equal | |
¥ | Prior to mounting, please inspect the installation location to insure that the location is | ||
depth of hole (15mm) + the | |||
| strong enough to support the mounted unit and that the unit will be safe from harm. | ||
| thickness of mounting bracket. | ||
|
|
¥DO NOT block ventilated openings by mounting accessories or other items too close.
¥Refer to the manual included with the mounting equipment for detailed instructions.
Orientation
¥DO NOT use this monitor in the portrait position. Doing so may cause failure and void the warranty.
Mounting location
¥ The ceiling and wall must be strong enough to support the monitor and mounting accessories.
¥ DO NOT install in locations where a door or gate can hit the unit. Do not install in areas with lots of vibrations and dust. DO NOT install near where the main power supply enters into the building. Doing so may cause fire and the electric shock.
¥Do not place where people can easily grab and hang onto the unit or mounting apparatus.
¥When mounting in a recessed area, as in a wall, leave at least 4 inches (10cm) of space between the monitor and the wall for ventilation.
¥Allow adequate ventilation or
Mounting on ceiling
¥Ensure that the ceiling is constructed strong enough to support the weight of the unit and mounting apparatus over time against earthquakes, unexpected vibration and other external forces.
¥Be sure that the unit is mounted to a solid structure within the ceiling such as a support beam. Secure the monitor using the bolt, spring lock washer, washer and nut.
¥DO NOT mount to areas that have no supporting internal structure. Do not use wood screws or anchor screws for mounting. DO NOT mount the unit to the baseboard or to hanging fixtures.
Maintenance
¥Check for loose screws, gaps, distortions or other abnormalities. If an abnormality is detected please refer to service person.
¥Over time, the mounting location may become weaker. Please check regularly.
English
Downloaded From
