NEC LCD73VXTM, LCD73VXM, LCD93VXMTM user manual Selecting Exit allows you exit OSD menu/sub menu

Controls –continued

FACTORY PRESET

Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings. The “1<−>2/RESET” button will need to be held down for several seconds to take effect. Individual settings can be reset by highlighting the control to be reset and pressing the “1<−>2/RESET” button.

EXIT

Selecting EXIT allows you exit OSD menu/sub menu.

LANGUAGE

OSD control menus are available in eight languages.

OSD TURN OFF

The OSD control menu will stay on as long as it is in use. In the OSD Turn OFF submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu. The preset choices are 10 - 120 seconds in 5 second intervals.

OSD LOCK OUT

This control completely locks out access to all OSD control functions without Brightness and Contrast. When attempting to activate OSD controls while in the Lock Out mode, a screen will appear indicating the OSD are locked out. To activate the OSD Lock Out function, press “1<−>2/RESET“, then “+“ key and hold down simultaneously. To de- activate the OSD Lock Out, press “1<−>2/RESET“, then “+“ key and hold down simultaneously.

RESOLUTION NOTIFIER

If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not at optimal resolution.

DDC/CI

Turns on or off the two-way communication and control of the monitor. With DDC/CI turned on, some monitor settings can be adjusted through the graphics card using a computer.

MONITOR INFO

Indicates the model and serial numbers of your monitor.

OSD Warning: OSD Warning menus disappear with SELECT button.

NO SIGNAL: This warning appears when there is no signal present. After power is turned on or when there is a change of input signal or video is inactive, the No Signal window will appear.

RESOLUTION NOTIFIER: This function gives a warning of use with optimized resolution. After power is turned on or when there is a change of input signal or the video signal doesn’t have proper resolution, the Resolution Notifier window will open. This function can be disabled in the TOOL menu.

OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned on or there is a change of input signal or the video signal doesn’t have proper timing, the Out Of Range menu will appear.

9