Quick Start –continued
Removing the Base
Note: Always remove the Base when shipping the LCD.
1. Place monitor face down on a
2.While using your thumbs, press the bottom tabs upward to unlock.
3.Press the top tabs down to unlock and pull off the stand.
Connecting a Flexible Arm
This LCD monitor is designed for use with a fl exible arm. Please use the attached screws (4pcs) as shown in the picture when installing.
To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor should only be used with an approved arm (e.g. GS mark).
12 mm
M4
4 x 12 mm with lock washer and fl at washer
Thickness of Bracket (Arm) 2.0~3.2 mm
Tighten all
screws.
100 mm | 100 mm |
|
Specifications
Weight of LCD assembly: 3.9kg - LCD73VX(MAX) 4.3kg - LCD93VX(MAX)
3.9kg - LCD73VXM(MAX) 4.3kg - LCD93VXM(MAX)
6
