3. Ventilation Requirements

When mounting in an enclosure or in a recessed area allow heat to disperse, leave space between surrounding the monitor and surrounding objects allow heat to disperse, as shown in Figure 6.

Figure 6

4. Main Power Switch Cover

The Main Switch Cover will be attached in one of two ways, depending on the orientation of the monitor. When the Main Switch Cover is used when the stand is attached the longer side of the cover will go underneath. When used without the stand, the short side of the cover will go underneath (Figure 7).

5. Prevent Tipping

When using the display with the Tabletop Stand fasten the LCD to a wall using a cord or chain that can support the weight of the monitor (approx. M40: 32.6Kg/M46: 39.3Kg) in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided clamp and screw (Figure 8).

Screw Holes

250mm

Cord or chain

Clamp

Screw

Figure 8

Before attaching the LCD monitor to the wall, make sure that the wall can support the weight of the monitor.

Be sure to remove the cord or chain from the wall before moving the LCD.

English

Main switch cover (with stand)

The longer side of the cover is toward the bottom of the display.

Main switch cover (without stand)

The shorter side of the cover is toward the bottom of the display.

Figure 7

English-11

Page 13
Image 13
NEC M60, M40 user manual Ventilation Requirements, Main Power Switch Cover, Prevent Tipping, English-11