Removing the Bottom Cover
To remove the Bottom Cover, first remove the keyboard (see Removing the keyboard), remove the CPU (see Removing the CPU), remove the LCD module (see Removing the LCD Module) then perform the following steps:
1.Remove the screws maintaining the Quick Key Board, lift it up and place it in safe location.
Fig. 32 Removing the Quick Key Board
2. Release all screws as shown in Fig. 33
Fig. 33 Removing the top cover screws
M2.5x5 black
M2.5x5 black
Packard Bell EasyNote M5/M7 Disassembly Manual | 20 |
